All I Need is to change the name, when I call someones extension, " Amy" Shows up and thats not my name

What are you using to program.

PT Programming or you are using a PC Tool?

Did you save after setting names?

Hi Amy, you can change the name for an extension, but it will change the name for the extension for all the phones.

It is best to do programming on a T7316, M7310, or an M7324

1. Feature **23646
2. Password: 266344
>>>your password may have been changed by your phone company. contact them for the password.
3. Scroll to General Admin
4. Go to Names
5. Select Set Names
6. Enter in the DN of the extension you would like to change
7. Use the dial pad to change the extension.
8. Press Rls when finished (handset with arrow facing down)

This is most likely done in the CCR programming. Someone that is knowledgeable in making changes to the trees needs to make these changes.

The recording of the name you hear announced during the transfer is the recording that the particular mailbox owner has recorded. If that mailbox owner has not recorded a name then you will hear a system prompt of the extension number. Access that mailbox as the owner and you can record a new name for the mailbox. This is easiest if done from that mailbox owners phone, you will need the password for the mailbox if password protection is enabled. Once in the mailbox it will play any new messages then follow the prompts to get to user options.

Create a new folder in "amy and rf" and transfer the files to the folder.

Start by pressing ** and see what the display shows. If it doesn't show anything but beeps, then you have the wrong phone. Try looking for extension 101 or the first phone in the system.

When you find that phone and press program **1234, you'll go into programming. Dial 004 and press ENTER. If you press ENTER again, you'll be looking at extension 101, or you can dial an extension and be looking at a name. Now you spell out the name on the keypad using the letters and the arrow key if necessary and press ENTER (the center of the Navigator button) to store the name. Notice that the 4th time you press a 3 letter ALPHA key, you will get lower case letters. Punctuation is under the 1, * and # keys and Q appears under the 1 and 7 keys :-)

Next steps you to the next extension and you can just pick up the handset and set it back down to end programming.

Carl

Do you know how to get into phone system programming? The extension names are changed in there.

This facility of changing name is in admin program. when you call up some body their name will bw displayed on your screen. It's fine .tell us that what name other person get.

input pasword

how to name extentions