Muratec MFX-2830 with call service :0C - Muratec MFX-2830 Black and White Copier

You should reset drum error code.Please contact any service authorized this copier

muratec mfx 2010 call service 18 problem

The collate button is an electronic one on the LCD panel...not a separate button.
Now if the display is not registering the "finisher" / collator as being there then it is possible that something is wrong .. maybe the collator/finisher was physically installed onto the machine but maybe the electrical connectors were not plugged in. Ask the person/company that donated it if it was working.

There is no "SERVICE MODE" as such....adjustments are done thro a variety of MENU modes or the alteration or "bits" contained in various Switch settings. Unless you know what you ar doing you can get in a real mess if you start playing.

Go to muratecs web site www.muratec.com go to the driver section and download the installation cd for the 2830 officebridge.
On it are the instruction for how to install on the network.

Open front door of the Finisher Unit. Over to the left beside the 2 green knobs you will see the Staple Cartridge. Pull slightly down and out and the cartridge will come out. A new cartridge has to be installed...they cannot be re-filled.

Hello sir; Please check the tray paper lifting motor seems it broke, otherwise check the paper sensor .

Do you mean Service CODES or Service Program MODES? Do you realize that there are almost 800 - 900 service codes and or program modes.... you would do better searching for a service manual for that machine, that will list the codes with explainations and program modes and what they affect when changed.

Most Muratecs now a days do scan in color. The 2850 is one such model. So to answer your question you are incorrect.

In network environments the muratec's usually have to have the setup disk run. They do not work on the standard TCP/IP port. The disk creates a muratec port for the pc to print to.