MFX -2380 (Muratec) issue with net work printing

www.muratec.com/new/support

www.muratec.com > Support > FAQs

You should reset drum error code.Please contact any service authorized this copier

muratec mfx 2010 call service 18 problem

Yes this indicator comes on approx. every 84,000 pages of print.
The Drum cartridge is "fused" and it will have to be replaced as the machine will eventually stop printing.
When the new drum cartridge is installed, the light will be re-set and you will be good for another ( approx. 84,000 pages.)
You will have to contact a local Muratec dealer to either get the drum cartridge or have them replace it.

0C means you have a cooling fan problem. Located behind the lower rear cover in the lower right hand corner of the machine. Either the filter has gotten caught in the fan "OR" the fan itself has gone faulty..."it is also a signal generator." So...check for the filter caught; or the fan may have to be replaced.

You cannot use the "add-printer" wizard to install the 1430...unless you got the machine with the PCL Print option installed; the unit comes standard with only GDI printing.
For the GDI printer port to be created on your PC you must install the machine using the installation disc provided with the machine.

Open front door of the Finisher Unit. Over to the left beside the 2 green knobs you will see the Staple Cartridge. Pull slightly down and out and the cartridge will come out. A new cartridge has to be installed...they cannot be re-filled.

The drum cartridge is different from the toner cartridge. The drum has reached its life cycle and must be replaced. This is normal for any copier of that class.
The drum is not too expensive and not difficult to replace.

Hope this helps!

you need to reconfigure the port in his computer. you change this in the driver on his computer

Most Muratecs now a days do scan in color. The 2850 is one such model. So to answer your question you are incorrect.