I LOST MY HITACHI REMOTE I HAVE A ALL FOR ONE AND NEED TO PROGRAM MY TV.

Any Hitachi remote made over the last 15 years should work the basic functions of this model--Take a look on Ebay. Did the original get lost or stop working?

In that case you'll need to either buy a generic one for all type of remote control and then follow the instructions to program it to your Hitachi tv, or you'll need to enter your tv model number followed by the word "remote" into a search engine to find out where you may buy an original model replacement.

Sorry I cannot be morte specific, but you didn't state the exact model of Hitachi tv which you own nor the country you're in.

Try the Hitachi website. Some makers provide them free as a PDF. You will need the model number, if they don't you could also post the model number on here again and see if anyone has a copy of your model.

You can get original replacement remotes here (warning: they are a bit pricey)

http://www.remotes.com/remotes/servlet/rs?a=Search&o=c&uid=0&m=C29-F800S+&uuid=12609245072340

eliztech.com lists the codes for each manufacturer...Good luck

i lost my mannual to my philips universal remote and i need to program it to my hitachy vcr,sharp tv. and my dvd

Unfortunately, most of these projection TV's require a remote. You CAN purchase an aftermarket remote. I would look for one that has all the features you need, PIP, screen format etc.... I have found that the Sony RM-VL600 works real well with my Mitsubishi TV... kids thrashed the remotes more than once...
This particular unit has system control PROGRAMABLE buttons on the bottom row. I've been able to program them for formatting the screen, setting audio and video... Solved my issue of needing a factory remote... KEN

Here is the setup copde page http://universal.dev.efocus.nl/?pag=54. I didn't see that model remote listed but many times the remote manufacturer will use the same codes.... So look at other remote codes for Hitachi and see which one works.

MM85

try this:

http://remotefinder.rca.com/default.aspx?site=jensen

I can not remember the nu mbers to program in the TV for the remote. I can turn on the VCR but not the TV. I know it is somehting simple like s ymbol/2 or 4/tv but it has not been working