No power to set but power button is blinking two pulses then stop
I have a 32" lcd Panasonic Viera and when I just tried to turn the tv on it started to go on then went blank. Now the power button is blinking two red pulses then stops, over and over
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Tries tv unplug,replug it back like about an hour later.Now the tv it is resetting itself back to the factory setting.The tv should be working again.If the problems,still have the same result.The power supply board is the causes and the problems.That the board,where the power a/c cord plug into it.Try website like Ebay.com to buy a whole refurbish power supply board for the replacement.If this a new tv,still underwarrenty,call Panasonic for the service.Tv is new just recently bought?Take it back were u bought it and exchange it for a new tv.
Power supply board is dead.Replaced the power supply board will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
id suspect its going in to a shut down mode its likley a power supply problem
but there are inverter boards that can cause this as well
you will probably want to find a servicer in your area to assist with this repair
Panasonic is te best in TV or DVD.I have 10 years a Panasonic TV.Please dissasambly and clean the remote control rubber pad and change the battery every 8 mounth,and all is OK.
×