20 Most Recent Panasonic Viera TX-32LX70 32 in. LCD TV Questions & Answers


Hi Geric1,
Reset your unit to factory settings. Follow this instructions :
1. On your remote control press the "menu" key.
2. Press the "right" key >.
3. Select "set-up" by pressing the "down" (v) key. Then press "OK" key.
4. Select "shipping condition" by pressing the "down" (v) key. Then press "OK" key.
After this go to menu again then select the set-up but this time access the tuning menu and then auto set-up to set all channels available in your area.
Your done, Exit to. Checked if the unit restore factory settings.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Panasonic Viera... | Answered on Nov 02, 2016


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

Panasonic Viera... | Answered on Oct 07, 2016


HDMI is a signal what do you have going on here?

Panasonic Viera... | Answered on Oct 04, 2016


If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

Panasonic Viera... | Answered on Aug 26, 2016


When you plug in to the aux audio jack, that cuts out the speakers automatically. There is no switch.

Panasonic Viera... | Answered on Jan 22, 2016


CALL YOUR CABLE PROVIDER THEY WILL GUIDE YOU MR. ROBERTS

Panasonic Viera... | Answered on Jan 21, 2016


MYGOODFELLOW, YOU HAVE TO SWITCH FROM TV TO AV 1

Panasonic Viera... | Answered on Jan 21, 2016


CALL YOUR CABLE PROVIDER

Panasonic Viera... | Answered on Jan 21, 2016


menu> setup> eco settings> no opperation off.

Panasonic Viera... | Answered on Jan 10, 2016


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

Panasonic Viera... | Answered on Jan 08, 2016


Check and replace its tuner. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Panasonic Viera... | Answered on Nov 14, 2015


Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Panasonic Viera... | Answered on Oct 17, 2015


If you have another TV fed from the same antenna, I assume you have a splitter/distribution amplifier because you know you cannot just join two cables together don't you?
It is more than likely the splitter/amplifier, cable or connections rather than the TV but to make sure you must move the TV in the other room and try it on the suspect cable before condemning the TV.
Signal problems are usually due to water ingress and this could have happened on just one cable.
Failing that, the TV input could have failed. It is not common but does happen now and then.

Panasonic Viera... | Answered on Jun 04, 2015


This has to do with the network & not your TV. For various reasons the networks may vary the overall time of programming, therefore you should schedule your recordings extending the record time.

Panasonic Viera... | Answered on May 16, 2015


this to allow some extra timing on the end to account for as to do with the timing of the program itself & not your TV. when recording a particular program it is a good idea to allot some time on the end to account for some stations overlapping.

Panasonic Viera... | Answered on May 15, 2015


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Panasonic Viera... | Answered on Apr 24, 2015


check the power supply circuit for leaky capacitors. You will recognize them by the bulging tops.

Panasonic Viera... | Answered on Apr 20, 2015

Not finding what you are looking for?
Panasonic Viera TX-32LX70 32 in. LCD  TV Logo

296 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4946 Answers

The Knight
The Knight

Level 3 Expert

73150 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VIERA Panasonic

  • VIERA Panasonic

Most Popular Question

signal strength excellent but quality up

  • Televison & Video
Loading...