My son broke the oven handle off and the oven door

Maytag mvp v microwave door handle parts Questions ...

www.fixya.com > Forum > Tags > mvp v microwave door handle parts

Maytag mvp v microwave door handle parts related problems. Ask your Maytag mvp v... The handle on my maytag microwave oven broke off ... door handle ...

Maytag Microwave Handle Parts from RepairClinic.com

www.repairclinic.com/Shop-For-Parts/.../Maytag-Microwave-Handle-Par...

Shop for your Maytag Microwave Handle from our huge inventory. Return any part for any ... Repair Help for Microwaves .... Microwave Oven Door Handle.

CMV1000ADW Maytag Microwave Parts and Repair Help

www.partselect.com/Models/CMV1000ADW/

Take it to a repair shop you will have to take teh back off the oven and gain access to the door lock mechanism from behind.

Remove the door's inner (interior) panel and inspect the trailing edge of the inside of the door. You should be able to see the door linkage from both the inner door handle and (what's left) of the outer handle (try moving the inner handle to see how the linkage is routed. I suspect that when the outer handle broke, its linkage dropped onto the inner handle's linkage and jammed it. With a long screwdriver, try moving the inner handle linkage to release the door latch and then replace the outer handle and its linkage (a salvage yard may be the best source and a Mitchell body repair manual should show hoe the linkage is routed and attached. Good luck.

Mike,
Found the diagram HERE and HERE and also has a parts listing you can order.
Hope this helps with you project.

Remove the inside door panel
Remove the door handle ,and get
whatever you need at the salvage yard

appliancepartspros.com. part number AP3187809 $56.40 plus shipping

remove door handle

Yes it can.

Of course it is.  You can glue it on with gorilla glue, perhaps using a screw shaft (be sure to drill pilot holes) like a dowel in carpentry to secure and add area for the glue to adhere to.  Drill the pilot hole in the handle bit the thread diameter rather than the shaft diameter, so you don't have to screw the handle on once you cut off the screw head.

find a spare handle will be ok.