I need a disc to enter my printer ito the computer ( mine damaged

admin account is disabled by default. Download Hiren Boot CD, use a disc burning program, and "burn image to disc" Put the disc in this computer and you can follow this video to reset your password.

Hello
There is some connection probelm with its hard disc and main board. Hard disc is the common bootable device to most of the computers. Just get ito its Bios setting window, by press and hold "Delete" button during boot up, and see whether the Bios do recogonize the hard disc. The bios must recogonise the hard disc. Check it.
If you want anymore assistance from me, be free to get me by Fixya. OK.

THIS SHOULD ONLY BE DONE IF YOU REPLACED THE DEVELOPER, OTHERWISE IT CAN DAMAGE THE DEVELOPER CURRENTLY IN THE MACHINE turn off machine . turn it on holding 0 and 5 when machine starts enter code 200 after about 2-5 min it will go ito adj. mode. press the enter key on the bottom of the display.
.

Hi,
click here to install drivers and instructions for your printer.
Please rate your response.
Thanks, SF

Epson Stylus NX400, Drivers & Downloads - Technical Support

You can get that info by going to Google and enter lexmark x73 installation.

1. Click Start. Click Run. Type cmd and press OK. 
2. Type "set DEVMGR_SHOW_DETAILS=1" (without quotation marks) and press Enter. 
3. Type "set DEVMGR_SHOW_NONPRESENT_DEVICES=1" (without quotation marks) and Press Enter. 
4. Type "start devmgmt.msc" (without quotation marks) and click press Enter. It should open Device Manager.
5. Click View. Click Show hidden devices. 
6. Click "+" to expand "Storage Volumes" and right click on everything that is under Storage volumes. Also, expand Disc Drive and uninstall everything present under this apart from your Hard Disc (Please make u dont uninstall Hard Disc)
7. If there any unknown devices right click it and click Uninstall.
8. Reboot the computer.

If this does not work please let me know.
Thanks

Hi All printers have a protruding piece of plastic on the cover / lid, when out of place it tells the printer the cover is open

When you close lid it is inserted into main frame which tells the printer that the lid is closed.

Look for this it may be damaged. If so roll a small piece of paper and insert ito the recepticle hole.

It will trick printer that the lid is now closed.

You will need to remove it each time you need to change inks etc...

Good Luck!

Tinteiros (Ebay)

Hello,
Select the correct model of the printer from here and it will take you to a free download page where you can download drivers, software and manuals. Also, you will need to select the appropriate operating system (vista or xp).

Thanks,
Lolita

Hi,

You can download here from HP.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&cc=us&lang=en&dlc=en&product=90809&

Just pick your operating system.