Embroidery not working

The thread sensor may be dirty.

Hello

The machine is indicating that it "wants" you to move the hoop into position P2 or P3 according to what is blinking. This is normal.

Once that colour is completed stitching, the machine will communicate again for the nest Position.

Happy Stitching
Sewingirl/

Hi there - have you had any joy yet setting up your Rose. I myself have a problem as I have relocated from South Africa to York UK and battling to set up my Rose Embroidery machine. Bought an external floppy disc drive and cant install software at all. Also converted the reader writer to usb and no go there either

The DC3050 is not an embroidery machine and will not be able to use a memory stick. It is a computerised sewing machine with decorative stitches.

Depends on what the limit is for your machine.

For example, if an embroidery machine is limited to a 4 x 4 stitching area, then it makes no difference how much larger the hoop is.

Call Viking direct

440-808-6550
800-358-0001

Could be the design you're trying to stitch out is eroded. Try rewriting the design to the card and see if that helps. If not, take your machine along with the embroidery unit, peddle, hoops, etc. to your tech for a once over. It may just need an adjustment.

Where are you - someone may know someone in your area that can help.

Stephanie

I am sorry to inform you that Husqvarna # 1 embroidery unit does not fit onto the Rose machine. The terminals on the Rose is upright, while on the H # 1 it is flat. If you want to do embroidery on the Rose, you will have to purchase the embroidery unit.

Sad but true

The Designer 1 technology is far more superior to the Rose. The Rose technology is so far behind that you can not update the software any more. The Designer 1 comes now with a USB stick, and you can download unlimited designs from the internet and transfer to your machine.

The Rose is a very good machine but you will be limited in the use of the machine.

If you can afford it buy the Designer 1