Radio will not work. no sign of getting electricty even when plugged in.

this is a main board problem mosty.

I would have the battery tested to see if it has a dead cell first . Some times this will happed especasly if its over 4 or 5 years old and if it was left on a cement floor during storage witch will conduct electricty and damage the battery If the cells are OK in the battery then start checking the connections to the battery bolth posivite and negitive to the battery . If it worked before storage there is realy no reason it shouldn't work after storage . Also look for mice damage the little bastards will eat anything in the winter including the jackets off your wires so look for signs of then Good luck with it

Pull off poss side terminal on battery for 5mins and reconnect!

Everything will reset, even radio,,,,,,,,,,,,,

probably the transformer, if it works on the battery but not plugged in thats the most likely cause. I have the same problem and will repost if the transformer replacement works. Cheers

check the power switch for voltage,, short it across the pins and see if the motor runs, if it does, replace the switch

Turn off you computer and pull out your sound card if it is external. Then plug it back in the same hole. It may just be loose. If this does not help try another card. If you have a built in sound card try installing updated drivers for it from the manufacturers web site.

Is it getting electricity? Check the breaker ... check the plug ... are you plugged into a GFI? Check the GFI

Yes and no, the charger will probably work with the voltage and frequency in France, but the plug will not, you need to buy a North America to France AC plug adapter. These can be had for a few dollars in most places. You might even find one at the airport, even if overpriced.

firmware issue. kindly download 3.1.2 firmware and and jail break it using blackrain.
to download firmware visit www.redmondpie.com for blackrain : www.blackra1n.com
use itunes to update the phone to select the firmware keep pressing SHIFT button n then press restore n browse n select the firmware file.

you need to buy a original power cord
i hope i can help you