Unable to download drivers for the followingDrivers

in the dvice manager if you see any yellow questionmark it means the driver is not installed properly insert the correct drivercd which came with the motherboard and it will auto install check the drivers you have to load or you can un install the driver in the device manager then selecting any driver click action and clic scan for hardware changes the drive cd must be in cd drive for the driver instillation

1st You download Webcam Driver.
Unable to load drivers for
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

2 things to try. Right click on the yellow device (not where the "+" sign is) the actual device. Then click on reinstall driver. Reboot. If that does not work, then click on yellow device again and uninstall driver. Then reboot, your plug and play will pick up the correct driver automatically..hope this helps, let me know how it goes.
Please rate this solution.

in device manager right click on the drivers and update drivers
then let me know

Apply this patch...

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-47284-1

I believe your answer is at this link...

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-47284-1

pls I need the bluetooth drive for my hp compaq nx7300,thank you

I am unable to get Creative PD1001 web cam drivers

Kindly send me the link

Regards

Sekhar

Whne you double click on the mouse in device manager, does it say "device not configured" or "unable to start this device". If it says "unable to start this device" try the mouse on a different computer to make sure it works properly. If it does then you probally have a software driver problem. Try contacting the mouse manufacturer or see if you can down load drivers from their site.

I'm unable to connect my western digital hard drive to my Windows XP computer via the USB port. When I check the USB 2.0 Controller in the Device Manager, there is a yellow exclamation mark (!) next to it. When I check on the status of the USB 2.0 Controller, the following message appears:

The drivers for this device are not installed (code 28).

What do I do now?