Thermador dual fuel range like above pdr366zs...F-1 code flashing and beeping...how doyou turn it off and what does it mean?

This says it is the Door Latch. Information on Thermador is often very hard to come by.

https://www.justanswer.com/appliance/d8oa4-thermador-48-duel-fuel-range-e11-error-code-small-oven-no.html

All the Error Codes

https://www.appliancehelponline.com/thermador.html

https://www.partselect.com/JustForFun/Thermador-Appliance-Fault-Codes.aspx

..

Send back for a replacement,obviously something definately wrong with that gauge reading 200 degrees at room temperature!!!

only code that is close ( e12) ( E12) look at display and make sure .. mm if the code is E12 then " CT oven:latch switch problem ) this may help Note E . 1 turn the clock selector knob to off 2 tweak the oven control by turning the clock selector slightly to the left ( counter clockwise ) this may stop the flashig message / beeping and clear the display window. " try it and pray mm .

one thing i found with the little blue flashing light is the main board in the back of the range not fun

My Thermador CT 127 Convection Oven will not turn on. Lights work, convection fan works, oven will not heat.

Best not to mess round with it. Git ya sparky round to have a look at it ....

I am quoting above because I really need help. "When I push any of the function buttons on the oven console (Timer, Bake, Broil, Clock) the display shows 0FF in red next to the clock. The oven will not turn on and the timer will not work. I can not find any troubleshooting information on this problem. The oven is a model RDDS30V. Any help would be greatly appreciated!"

There is a code sheet that tells you what the problems depending on the sequence of blinking lights, but only the authorized dealers have this information. I do have a copy if you want to email me and I will forward it to you. [email protected]

in pre heating the oven it does not go beyond 250 degrees. what could be the problem. I have a thermador 30 inch dual-fuel range (rdf30).