At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you have torque cylinder head bolts in 3 steps first torque bolts 14 ft lbs then second torque all bolts to 43 ft lbs step three torque all cylinder bolts to plus 90 degrees.
When tightening the head bolts remember to start with the centre bolts and work your way out both ways evenly. Never reuse old bolts, as the bolts are designed to stretch a tiny bit for a perfect fit.
The tightening is done in 3 steps:
First tighten to 20 NM, then 60 NM and, finally, turn the bolts an additional 130 degrees.
I do not have the service manual, but the page below can help you:
Copy and paste the link below on your browser address bar (eg. on Internet Explorer):
http://www.volvoclub.org.uk/faq/EngineSensors.html
×