I keep getting a black screen with red writing flashing saying that i have not connected power properly

Your Samsung television appears to have a problem with a black screen. You can try a few things to get the problem fixed:

• Check the connections of the cable: Check to see that the cables that connect the TV to other devices, like a Blu-ray player or cable box, are properly connected and not damaged.
• Try another input: Change the TV's input to see if the cable connection or the TV itself is the problem.
• Examine the power supply: Check to see that the TV is plugged in correctly and that the outlet is working properly. Check to see that the switch that controls the outlet is turned on.
• Reset your TV: Wait a few minutes before reconnecting the TV to the power source. This can sometimes solve problems for a short time.
• Reach out to Samsung Support: If the problem persists, you should get in touch with Samsung Support for assistance because it may be a hardware issue.

ALBa something, it has model number or sub name.'
googling that name,gets me nothing
what you said makes zero sense
try the full story
what does not work,computers have 1000s of ways to fail.
the screen is black. is our only clue.

this i can not understand
i can connect to my laptop and says device? works properly?
what laptop what device, connecting how?


if you turn on the ALBA
and it seems its ALIVE
use a flash light, to see if the LCD screen has data
if yes, the back ligting is dead.
but , what is an ALBA.

i can not tell what any person can fix.
in my shop it is taken apart and we check power to the screen first
if it dead,maybe the battery is toasted.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

yes it does make a difference if it not connected but a box should pop up and say somthing like no video input or somthing along those lines
or just a box red blue and yellow for a second or 2 and then go black.
hope this helps and answers your question?

get someone to open it up and check the hard drive and cd/dvd drive cables. also make sure ur operating system is installed properly

but the cf card and push the red button and turn the power remove your figer from the red button
and push the red button on time only.

Hi when the power button flashes red if you hold down the little round white button under the dvd tray and keep holding it down then press the open button for dvd then it will flash a number of lights write this down.
it will be flashing 1 2 3 or 4 lights so write it down then hold down the white button again and press the draw open button again and write down how many again.
do this 4 times all together and tell me what code it has given you then i can tell you exactly what the problem is

so for instance
you hold down the little white wireless button and keep holding it down then press the open button for the dvd tray and say 4 lights are flashin
so write down 4
then hold white button down again and press open button again
it may flash 4 again
then do it again and it may flash 2 lights
then again and it may flash 2 again

when you have gotten these 4 codes post me a message and tell me exactly what they tell you and in the correct order so it may look like this
4 lights flashing
2 lights flashing
1 light flashing
2 lights flashing

if you look at where the button is where you turn it on well you have the green light in the middle well around this is four outer lights that light up red their are 4 of these 2 at the top and 2 at the bottom either side of the green light, their the ones that flash green when its spinning rounf with green lights so write this code down then ill be able to tell you exactly what the fault is ok

let me know then i can assist you further ok

its not getting any signal from the PC/laptop, the multi pin wire is not connected properly.
you alos need to make changes in your control panel under Display/Monitor/ there must be the option to switch from laptop screen to monitor screen
check the correct option

The batteries probably need to be replaced. Be sure that any batteries seat properly and tightly. You may have to tape the battery door shut with strong tape to keep the contact tight. This type of damage is expensive to repair compared to the cost of the cameras. You can take it in and have it looked at, but be sure to get an estimate and then you can make an educated decision on whether to repair or replace it.

Best wishes to you and Thank you for using Fix Ya!

either the piece of paper is jammed in between the gears of the printer.
or the toner cartridge is not fitted properly.
or any of the paper sensors are broken internally.they r very delicate and very thin and r black in colour.
just connect it to the pc and give a printout and the screen will display the problem in the printer if its paper jam then cleaning is required or the sensor is broken.if it says missing cartridge then cartridge not fitted properly.