Hi, You will have to open ports on the router for XBOX and for this you need to have a computer connected to the router.
1. Open the browser (Internet Explorer, Mozilla Firefox or Safari)
2. Access the router, usually with
http://192.168.0.1 or
http://www.routerlogin.com.
3. Login to the router (Username = admin Password = Password unless you have changed it)
Create Services for the ports on the router:
1. Click on Services under Security.
2. Click on 'Add Custom Service' button.
3. Specify any name for the service (for example, XBOX1).
4. Specify the Start and the End Port as 88.
5. Click on 'Apply' button
6. Follow the steps 2 to 5 to create the services XBOX2 for the ports 3074.
Open Outbound rules for the services created using the steps below:
1. Click on 'Add' for outbound services.
2. Select the Service as the one that was created(like, XBOX1 in our case).
3. Select Action as Allow Always.
4. Set LAN users as Any and WAN users as Any
5. Set Log as Always and Click Apply
6. Follow the same steps for other services also.
Open Inbound rules for the services created using the steps below:
1. Click on 'Add' for outbound services.
2. Select the Service as the one that was created(like, XBOX1 in our case).
3. Select Action as Allow Always.
4. Set the 'Send to LAN Server' as IP address of the XBOX
5. Set WAN users as Any and Log Always
6. Click Apply. Follow the same steps for other services also.
Click Apply on Firewall Rules Page.
I hope this information allows you to resolve this issue.
×