How do you set the clock on a clarion car radio model RAB030F

Page 51 of the manual, under General Setup Menu, is Clock.
Here is where you set time, AM/PM, or 12/24 hour clock,

Setting the Clock
:$To turn the Power off, Press the POWER button ,) press and hold the BAND button a,wh ile
again. pressing the Function button 1 a to enter
2) Use the Up and Down buttons to adjust the clock display mode.
the volume. 2) Press and hold the BAND button m, while
A : Increases the volume. pressing the Function button 1 for 2 sec-
V: Decreases the volume. onds or more. This enables clock editing.
,#A Ci'4UTlOM
Audio Mode Adjustments
Press and hold the BAND button m, while
1) Press the AUDIOMODE button to select
the adjustment mode. The mode switches as
follows each time the AUDIO MODE button is
When this unit is turned on, starting and stop- pressinq the Function button 1 at the same
pressed:
BASSrrREB + BAUFAD -B Previous mode
2) Use the Left and Right and the Up and Down
buttons a, to adjust the bass and treble.
-=Adjusting the bass>
bb : Bass gets stronger.
4: Bass gets weaker.
-=Adjusting the treble:,
A: Treble gets stronger.
V : Treble gets weaker.
3) Use the Left and Right and the Up and Down
buttons a, to adjust the balance and
fader.
<Adjusting the balance>
W: Sound from right speakers gets stronger.
44: Sound from left speakers gets stronger.
<Adjusting the fader>
A: Sound from front speakers gets stronger.
8 : Sound from rear speakers gets stronger.
*The editable fields will be indicated by flash.
3) To move between the hour and minute fields,
use the Left (hour) and Right (minute) buttons
a.
4) To.store the clock setting, press the BAND
button a.

After spending an hour, here is how you do it. With the radio playing, press and hold the BAND button, until the word MANUAL displays in the bottom left. Then press and hold BAND, plus DISP (4). The radio will then go into Clock mode. You can change the hours by pressing the left scan, and the minutes by pressing the right scan. When finished, press the BAND button. To exit MANUAL mode, press and hold the BAND button.

since i don;t know which version you have of that unit here is a link with manuals just pick the version and it will tlel you how to set your clock.

Clarion

Setting the clock:
1.Press and hold the Band Button (on the left of radio)and the Clock setting button (button No:4 on the right) to display the clock.
2.Press and hold the Band button and the Clock Setting button again for 2 seconds or longer for the clock display adjustment.
3.Press the SEEK UP Button (on the right of the radio with the arrows) to set minute.
4.Press the SEEK DOWN button to set hour.
5.Press the Band button to confirm the clock setting.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

to set the clock just press and hold the DISP for 5 to 10 seconds, button while the clock is is displayed. When the the time starts flashing, use the DISP button to adjust the time. When you have the correct time, just hold the button until the clock stops flashing and you're done.

Setting the clock:
1.Press and hold the Band Button (on the left of radio)and the Clock setting button (button No:4 on the right) to display the clock.
2.Press and hold the Band button and the Clock Setting button again for 2 seconds or longer for the clock display adjustment.
3.Press the SEEK UP Button (on the right of the radio with the arrows) to set minute.
4.Press the SEEK DOWN button to set hour.
5.Press the Band button to confirm the clock setting.

Found this elsewhere on this site:

To set the clock, press and hold BAND and DISP to display the clock. Press and hold BAND and DISP until the display flashes. SEARCH left to adjust the hours; right to adjust the minutes. Press BAND to set.

Go to this site...
After a year of searching, I finally found the answer.

http://www.teamclarion.com/sharedwebdbs/clarionsupport.nsf/b519d112bdcca8b588256a630071fab1/7b628a3ede7779ef88257194006bd8fc?OpenDocument

Mdaly, Automotive radio is not really my fortay but this problem is fairly simple so here goes: 1. Press and hold the BND button and then press the DISP button to display the clock. 2. Press and hold the BND button and then press the DISP button for a couple seconds or longer to put it in set mode. 3. Press the search up button to set the current minute 4. Press the search down button to set the current hour 5. when finished press the BND button again and the clock is set... If you would like the manual you can email me privately and I'll be glad to send it... [email protected] Bill