Hello, i´m repairing an Acer AL2671W, the initial problem was the image with low bright even the bright and contrast controls are at 100%, later the tv sometimes get blocked and will not response to keys nor remote, finally the tv will not turn on. Analyzing the circuit and testing the regulated voltages with an osciloscope i found oscillations on many regulated voltages on the video board, because of the bad quality of the electrolitic capacitors which have high ESR. After replacing many 100/16 electrolitic capacitors, the problem was solved but apparently the eeproms contents was corrupted during the past malfunction of the CPU when the voltages were unstable, some options of the menu do not work properly, and the image is a little dark even with the bright and contrast at 100% both, the 7 lamps CCFL are on, i think that some values in the eeprom are corrupted, i need a way to reset those values to the factory defaults using the remote control, or need the eeprom files to write directly to the eeprom chips. There are 4 eeproms, two 24LC02, a 24C08 and a 24C32. I think that the main eeprom is the 24C32, and is which is corrupted. Thanks in advance for your help.