What is error code 093-550 for xerox colorqube 9301

That error signifies a printhead tilt fault. You need to replace the process drive camshaft kit, part number 8900-Z1.

http://www.iteminconline.com/8900-z1_8900-z1-xerox-8900-process-drive-camshaft-kit.htm

Appears to be a marking unit issue.

Interesting. Recommend reading and trying the software from Microsoft. http://www.saetechnologies.com/colorqube-error-code-093-547/

error code 377.123.02 for Xerox 6700

I looked at the Xerox 8900 support page: http://www.support.xerox.com/support/colorqube-8900/support/enus.html

The answer I found for Error Code 093-516 was problems with Yellow Ink Stick. Our printer had been switched of for quite some time which probably caused the ink stick/sticks to get stuck (or something). I opened the ink bay and pushed slightly on all the sticks to make sure they were "all the way in", added some more ink behind them and it started to work again.

I had to do a few cleaning jobs for smudges and now it's fully operational.

The error code refers to a Hardware "Pest" Fault (RAP Group:Power, Head Thermistors Name:Power, Head Thermistors). You should contact Xerox Support by phoning them directly. You'll find the numbers relevant for your Country here >> http://www.xerox.com/about-xerox/contact-us/enus.html

On the ColorQube 9201 and 9300, this error says "Head 3 cyan reservoir did not fill within the correct time." This a difficult machine to service so you shouldn't start without full documentation and experience.

This code may require one of a dozen parts, most of which are expensive and challenging to install.

Good luck ...Whit at www.iteminconline.com

The ColorQube is a big $20K machine that is rather difficult to repair. Hiring a professional is the best practice. Even so, being informed will assist your discussions with the technician.

This error tells us that a Cyan reservoir isn't filling up. There are many suspects, probably Purge Line, Ink Reservoir, or Printhead. If you want to repair it on your own, you will need a service manual, and tech support.

Whit
Item, Inc.

The error is a printhead tilt fault. It's unable to tilt on the axis, caused by a fault camshaft and process motor. The part you need to fix it is 8570-Z1.

http://www.iteminconline.com/8570-z1_8570-z1-xerox-colorqube-8570-8580-8700-process-drive-camshaft-kit-includes-process-drive-motor-drum-maintenance-camshaft-transfix-camshaft.htm