Finlux 19H6030 19" LED TV 1280x720, 50 Hz, Freeview, HDTV Logo

Related Topics:

a
alan nelson Posted on Apr 29, 2016

I need a rf box as the Ariel input has been damaged

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Tv will not work on ariel only but works through set top box how can I get it to work through ariel

Arial now have to be digital compatible to usually work or they must run through a digital box to convert it. press the helpful button
Hooking up Digital TV Converter Box
0helpful
1answer

Where do I attach the aerial on the Hitachi 55PMA550 ??

The Hitachi 55PMA550 has the RF input on the left hand side of the center A/V input/output area, assuming the TV wasn't damaged. The AV1 input is on the right hand side.See page 48 of the manual (page 50 of the PDF); it's available here: http://www.hitachi.com.au/documents/product/55PMA550A_manual.pdf .

Note: this TV only has an analog tuner. You may need a set top box if your cable provider has upgraded to digital signals or if you are watching OTA channels.

I hope this helps.

Cindy Wells
0helpful
1answer

Have Sanyo DP50740 Plasma tv and Dish Network receiver. This morning I turned TV on and receiver on and Black screen appeared on TV with floating no signal box with white letters. I do not have the t

Check the TV first by tuning it to an external RF source; ie; on-air program by connecting it to external Ariel and make sure that the TV is OK. If the TV works fine with on-air program, the Dish Network receiver is either fault, of it do not get input signal.
http://electronicshelponline.blogspot.com/
0helpful
1answer

My tv is a sony fwd 40lx1, it will be connected to a sky+ box, but theresno scart on the tv

Use the RF 1 socket on the sky box into the ariel socket on the tv.
Pick a channel number on the tv and tune it to frequency 68.
0helpful
1answer

How to connect sega master system 2 to lcd plasma tv

If your TV comes with a composite video input then this may not be an issue. You need the RCA AV cable. Sega outputs only mono audio so put Yellow in TV video In and White in TV audio In (white connector).
http://www.gametrog.com/GAMETROG/HOW_to_connect_Hook_Up_SEGA_Master_System_Instructions.html

If you still have the RF box for the Sega then you should be able to put RF from Sega and TV antenna to the RF box and connect RF box to TV antenna in.

If TV is only HDMI input then you need a converter like this
Composite Video to HDMI Converter
0helpful
1answer

What model of a conveter box do I need to set up the TV ?

Different TVs need different type of converter box to work properly. If your TV has audio video [A/V] input socket, go for a converter which has A/V output in it. If your tv has no A/V input, and only one ariel socket is there, buy a coverter which has RF output in it. Most of the coverters have both A/V and RF. Just buy that type of converter and it is good for you if you are not sure about the matter.
1helpful
1answer

BOX THINGY

the box is a RF switching box
the lead you require is a phono to ariel lead (megadrive, master system or any old computer will do)
or if you get an old video lead and cut of one end and wire a phono plug to it it will also work.
or you try ebay
http://shop.ebay.co.uk/items/_W0QQ_dmptZUKQ5fVideoGamesQ5fVideoGameAccessoriesQ5fVideoGameAccessoriesQ5fJN?_nkw=sega+rf++Master+System++&_sacat=0&_fromfsb=&_trksid=m270.l1313&_odkw=sega+rf&_osacat=0

a basic lead for £2.50
replacments upto £10
both work
Not finding what you are looking for?

51 views

Ask a Question

Usually answered in minutes!

Top Finlux Televison & Video Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Stan Ford

Level 3 Expert

3131 Answers

Are you a Finlux Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...