My light and fan combo has worked fine for the last three years or so. Yesterday when I went to turn on the lights, there was pop sound and my remote receiver was shorted out. What is going on?

I never saw a Four Seasons fan with an Intel touch control and I've been in the fan business for over 20 years. What is the actual model #?

Did you remove the old bulbs and replace with new?

The light on the remote is a battery light. First mistake was buying a store brand fan which are mostly low-end parts. Try adding a different remote w/receiver.

Sounds like a loose wire nut to me. When you turn the light on the connection warms up and the wires will expand. When you turn it off they cool down and contract. Combine that with slight vibration from the fan over 4 years it could cause a loose connection. Just pull the trim ring down and tighten all the wire nuts. The light is usually the blue wire. Dont forget to kill the power first. If that doesnt work its probably a bad remote sensor.Inexpensive and easy to replace.

unplug for a couple of minutes then plug back in and try

May be the receiver Call Hampton Bay @ 18005533199 have your UPC number ready

there should be a remote inside of the fan that probably went bad

make sure the main switch is on ,also the chain switch on ,before using control remote!!

if you get in touch with hunter they will send you a replacement reciever for you unit if its not discontinued