I NEED TO PROGRAM THE PRIVATE CHANNELS ON A USED BEARCAT 350A SCANNER

http://www.uniden.com/cb-radios/bearcat-pro-series-40-channel-cb-radio-with-weather-alert/invt/pc78ltwg


you download the user manual and read it a few times
and play out a few senarios ....

happy days

Hi, my name is John. Find the channels you want to L/O, then press the L/O key. That's all there is to it . Enjoy... hope this was helpful...

The BC60XLT is limited to ten channels. Programming is best described in the factory manual, which you can download and print here:

http://www.uniden.com/pdf/BC60XLTom.pdf

Bill B

You BC350A provides coverage of popular bands between 29 and 512MHz, so it is not capable of receiving signals in the 800MHz range. Sorry, but you'll need a different scanner to follow the action.

For a comprehensive database of active frequencies and systems in your area, visit:

www.RadioReference.com

For information on current scanner models and their capabilities, visit:

www.ScannerMaster.com

With the scanner powered ON,

1. Press [HOLD].
“HOLD” appears on the
display.
2. Press [PROG]. CH appears
and blinks to indicate that you
are in the Programming Mode.
To change the displayed frequency,
use [UP] or [DOWN]
while “CH” is blinking.
3. Press [PRIVATE]. “PRIVATE”
appears on the display.
If you want to program it into
another bank, press the
desired bank key. The lowest
open channel appears on the
display.
2 screens alternate to indicate
that open channel is available
to be programmed.
The scanner automatically
selects the lowest open
channel (000.0000) for easy
programming. If all channels
have been programmed (there
are no open channels in the
bank), channel 1 appears.
Use [UP] or [DOWN] to select
a new channel and even overwrite
old channels.
4. Press [PROG] to store the
frequency in the desired
channel.
Note: Press [BAND] to escape
from programming mode before
step 4.

Need the manual? You can download/print it here:

http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

There are several ways to program your scanner, so the best thing for you to do is review the owner's manual for your scanner. You can view/download/print your scanner manual at:

http://uniden.com/pdf/BC350Aom.pdf

I couldn't find the "A" but here's a link to the manual for the BC350C. Hopefully it will help.

http://uniden.com/pdf/BC350Com.pdf

to listen to the programed channels you need to turn the squelch up to to the right and press scan it will scan all the channels and stop on the ones that people are talking on. you can down load the user manual at the bearcat scanner website.

Start by pressing 'band' & select the band that the freq you want to program is within by using the 'up' or 'down' button, then press 'search' , when you see the display getting close to the desired freq, press 'hold' & then use the 'up' & 'down' buttons to zero in on it. Then press 'program', then press 'private' & select the channel you wish to put it on (1-50). Repeat this process as needed. I find it's easier & faster to program all the freqs within a band as you can assign them to whatever channel you wish within the 50 in the private bank, then do the other bands. Hope this clarifies it, good luck. Regards from Community Communications in Wanaque, NJ.

Hi if you use this link it is the full users manual for the 350a everything you want to know is in it
http://www.uniden.com/pdf/BC350Aom.pdf