Re: I have a phillips tv remote and can't get it to...
How is this possible!
both are of different companies.
i know, that now-a days there's a button by which we can control two appliances but being of another company this button will not work.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Curry's Partmaster has a large selection of Panasonic remote controls. However they are not listed under the model numbers of the VCR. Instead they have there own part numbers for example: EUR511244. This remote number might appear on the user manual. If you don't have the manual, the Panasonic website has free PDF's of them.
Are you sure it's not a NV rather than ND?
If it is an NV then you have probably got a K-Deck Chassis model and F06 means that the mechanism is locking up after unloading (getting stuck). This is something to do with either the Load Motor or the Carriage aligment.
There is free information on-line about the K-Deck which can be found by Google search.
You have a K-Deck mechanism. F06 means the mechanism locks after unload. The cause of this is the load motor or the carriage alignment.
If you enter "Panasonic K-Deck" into google you should find service information and a guide to getting the tape out - all free!
I have a panasonic analogue television, and I cannot tune in a Goodman VHS VCR to the television. I have no remote controller for the television, and use the buttons on the front of the set to change stations 1-5. I have however found AV on the television screen and the indication is that the VCR is trying to come through when switched on. I have got a remote controller with the VCR. Can you help me please ??
You need to program the VCR (which turns the sey on/off) as an aux, then program any Panasonic TV type for TV, and then set the STB button to control STB, TV and AUX and you should be set.
×