It makes a high pitch sound, then says FAIL 008 on the display. It stays on the screen and you can not use the radio.
Have you tried resetting to factory defaults? Here's how:
Radio101 How To Reset Motorola RDX Series Radio
SOURCE: Fail 008 on the display
You can reset to the factory default settings to try and clear the problem. If you do this, you will need to reprogram your radio to match your other units OR reset ALL the radios you have. If your radios were never programmed by yourself or the dealer, you may have been on the factory settings anyway, so you wouldn't have to worry about programming. You'll know right away because your radio will either talk to the others or not.
To reset: Press the PTT, SB2 and SB1 simultaneously while turning ON the radio until you hear a high tone chirp.
837 views
Usually answered in minutes!
×