Mr.steam ms225e clogged pipes

Quested edited 'stream to steam'.
Question moved from Cars and Trucks.

It has a leak somewhere that is shorting the power to ground. It appears to be a known issue.

https://www.google.com/search?q=mr.+stream+ms400e+steam+shower+generator+trips+breaker

..

Espresso Makers FAQs at MrCoffee.com.

www.mrcoffee.com/.../espresso-makers/espresso-makers-faqs....

Mr. CoffeeBrowse our Espresso Makers FAQs to find answers to common questions about Mr.Coffee products. ... Why isn't espresso coming out when I try to brew a cup?

Steam Espresso & Cappuccino Maker (ECM160-NP) - Mr ...

www.mrcoffee.com/.../mr.-coffee...espresso...maker...-/ECM1...

Mr. Coffee
Rating: 2.7 - ‎32 reviews
coffee-steam-espresso-and-cappuccino-maker--ecm160-np-/ECM160-NP.html ..... Thecoffee grounds don't come out wet like the other unit. ..... too much as the steam pressure only (no pump) isn't enough to force the water through the "cake".

Repair Your Clogged Coffee Maker - Instructables

Check the reaactor, and also diodes

The espresso portion may be clogged with hard water deposits, and the steamer tube with casein. Run a tank of plain white vinegar a couple of times then run a couple of tanks of plain water to flush the vinegar, Open the steam valve while the espresso portion is running and set the steamer pot under the steamer. Don't be surprised if a long white tube of hard white material slides out of the steamer valve. That's the casein, actually a form of organic plastic.

Hi my name is Mike I am with Mr. Steam Product Support. PRR is a code that shows up on our Steam Bath controls it was not used on our Sauna's. The PRR means there is a problem with the temp sensor on the control.please call me at 800-767-8326

I just got this problem too, any solutions or a link to the manual?

Hi, kindly check the connection of your temperature probe down to the main board maybe its loose.

I have the same problem! any fixes? ideas?

Sounds like a clogged steam pipe or a jammed two-way valve. First, I would try unfolding a small paper clip and then stick it up the spout of the steam pipe. if this does not free up the steaming arm then it is most likely a clogged two way valve. Should you need service you can call 781-393-2929. we are an authorized lavazza distributor and service center

Try replacing the safety valve or look at your pressure controls which may be clogged.