Question about Samsung TV Remote Control

1 Answer

My samsung 3D led multisystem smart TV remote control does not work anymore

If lucky enough, you can switch on TV, otherwise, it does not operate. Sometimes it works and the next hour, it stops operating

Posted by Anonymous on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Samsung Expert
  • 295 Answers

It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

  1. TV off
  2. Bring remote within 3 feet of TV
  3. Push Pairing button (Paper Clip or other pointed object in button hole)
  4. Turn on TV
  5. Should be paired. Try remote channel or other buttons.
  6. If not, try 2 more times.
  7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

Please rate if Helpful.

Good Luck !!

  1. TV off
my samsung   3D led multisystem smart TV remote co - samsung-3d-led-multisystem-smart-tv-tiee3lbaghb4kteyvqjgelx1-2-0.jpg
Within 3 feet of TV

and RESET buttons:


Posted on Jun 03, 2016


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 226 Answers

SOURCE: Remote control has stopped working.

your remote needs to be put back in TV mode. press the tv button or slide the switch to tv

Posted on Apr 28, 2009

  • 6 Answers

SOURCE: want to use samsung remote to control fios box and tv

You can use your own SAMSUNG remote but some of the guide options and dvr buttons may not come across.  If your remote allows you to 'map' the buttons you could circumvent the issue.
Another suggestion would be the universal remote by harmony.  great gadget.  pricey though.

Posted on Apr 28, 2009

  • 1 Answer

SOURCE: Program Comcast remote to operate Samsung 46"LCD

The answer depends whether its a Comcast DVR Remote or a regular one. The DVR codes are 4 digit -- the others are 5 digit. I got 0060 to work for my DVR remote.

Posted on Jun 02, 2008

SOURCE: need control code, to operate dvd samsung

Yes. I found the code. To operate Samsung HT-Z 310 with a remote control of Samsung TV, You have to turn off DvD, and then select Dvd on the remote(press the dvd button), press SET on YOU
remote control, input the CODE(020). For different Samsung dvd. you can from 000-to 080. The DVD button must blep three times. After that swich on Dvd. Enjoy....

Posted on May 05, 2009

  • 1 Answer

SOURCE: original ak59-00104r remote control device does

Take the batteries off, press the button "0" for 1 minute, put the batteries back on, try it out.

Posted on Mar 19, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

3 tvs run off a booster all say no signal, I have changed the booster and they all STILL say no signal ?? can anyone help

Test the incoming signal by connecting a tv directly to the antenna downlead (booster disconnected). The general rule is there should be enough good clean signal to operate at least one tv properly otherwise there is little point using a booster.

If the tv operates correctly the booster should provide enough signal to operate all 3 tv sets, assuming there is nothing wrong with the wiring; coaxial cable, connections and so forth.

If the test tv doesn't operate you will need to revisit the antenna, the positioning and aim and the downlead. Sun, rain, wind and frost can ruin an aerial downlead in a few years.

Feb 24, 2018 | Televison & Video

1 Answer

I have a samsung UA55F8000 led. It keeps turning on and off.. Please advice if its just the capacitors or does the whole power board needs to be changes

If you can not see any failed capacitors ( bulging or ruptured case of capacitor ) then you need to replace the entire board.

May 30, 2016 | Samsung 55 Inch UA55F8000 Smart Full HD 3D...

1 Answer

I cant get remote set up

reread the instructions is best choice . perhaps have a friend go thru it with you

Apr 30, 2015 | Samsung 32 Inch UA32ES6200 Full HD 3D...

1 Answer

How do I reset clock, not been used for a while.

There should be a time set button. Hold it down until the numbers flash (the hour usually flashes first, but sometimes it's the minutes). Then use arrow buttons to advance the hours/minutes. Switch to the next setting with (probably) a mode button. If that doesn't work, start over and keep trying buttons until you find the right one. Once the time is correct, most clocks will return to normal operation 10 seconds or so after you stop pushing buttons. Others require you to press one more button.

Oct 28, 2014 | Measuring Tools & Sensors

Not finding what you are looking for?
Samsung TV Remote Control Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75591 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides