No tv channel

Push the "L/O" lockout button and it will lockout that channel.
When you press "Scan" you have to have at least one of the banks scanning, so press 1, 2, 3,....9, 0 whatever bank you have channels programmed in order to automatically scan. You should be able to press "Manual" to see each channel individually.

It might be possible your number 18 is the interference eliminator code. Your radio may be stuck in programming mode which would be caused by one of the buttons being stuck or the tactile switch behind it on the component board being faulty.

Best regards.

No idea here iam still in the age of 2 channel TV in black and white and medium wave radio .radio caroline??

radio has a 3 yr warranty .send it back to galaxy

radio shack pro 97 scanning receiver,

Try pressing the emerg. or Cha.9 button....hope this helps...

same as above

Go to Radio Shack and get an universal remote control, i have a Phillips Universal for mine. it has a tv/vcr button that also is an "input" button to switch channels to do this.

go to setup in menu from fromt of set. do 1st time setup ...tell it you do NOT have a cable box. if it thinks you have one it deletes all channels but 3.