20 Most Recent Galaxy Radios DX-959 40-Channels Base CB Radio Questions & Answers


i would assume you have wired it incorrectly or have tried another 4 pin mic such as an midland which are wire differently for the galaxy, ranger, connex, cobra an undien 4 pin mics. Galaxy Radios DX959 MOSFET Final Service Manual

Galaxy Radios... | Answered on Oct 26, 2017


Turn up your mike gain. Mod the beans out of it and that should fix your problem. Crank every screw you can see on the board and wash it out with soap and water. This will fix it good.

Galaxy Radios... | Answered on Jul 19, 2017


https://youtu.be/roZztDr21lM

Galaxy Radios... | Answered on Oct 29, 2016


another non cb question

Galaxy Radios... | Answered on Oct 05, 2016


this is a galaxy cell phone not a galaxy cb radio.

Galaxy Radios... | Answered on Oct 05, 2016


You just have to lower your RF power so that the radio is putting out about a 2 watt dead key. Any higher and you will over drive the finals and burn out the final

Galaxy Radios... | Answered on Apr 27, 2016


look for other fingers that have been in the radio. then back track from there. It could be a switching diode thats burnt.

Galaxy Radios... | Answered on Oct 01, 2015


why do you need a diagram wat radio is it

Galaxy Radios... | Answered on Aug 04, 2015


This is going to take a bench test by a technician to fix.

Galaxy Radios... | Answered on Jul 27, 2015


Stock
1- Shield (Ground)
2- Yellow (Audio)
3- Red (Transmit)
4- White (Receive)

Cobra
Stock
1- Audio
2- Transmit
3- N/C
4- Shield
5- Receive

Galaxy Radios... | Answered on Jul 27, 2015


What is the make and model of this?

How are you able to tell that is the problem?

Galaxy Radios... | Answered on Jul 27, 2015


sounds like you got a good radio to practice on . If it was given to you then you have nothing to loose except what ever you put into it. try hooking the speaker jack back up, see what it does??

Galaxy Radios... | Answered on Mar 16, 2015


that one diget doesn't mean anything as long as the diget after the dot remains steady.

Galaxy Radios... | Answered on Mar 16, 2015


I would suspect mic first possibly broken solder connection at jack that inserts into radio.

Galaxy Radios... | Answered on Mar 04, 2015


You may have what we call a bad solder joint or a problem with the connection point from the counter to the radio. You need the expertise of a CB radio repairman.

Galaxy Radios... | Answered on Dec 21, 2014


An external freq counter will always do a better test then the one on the unit . Do you have an oscilloscope? A function generator will also have a freq counter . Now the ultimate is a spectrum analyzer. you don't need all these but the function generator will work fine.

Galaxy Radios... | Answered on Dec 17, 2014


you probably blew your audio ic not you final .take it to a tech and let him fix it.

Galaxy Radios... | Answered on Dec 17, 2014

Not finding what you are looking for?
Galaxy Radios DX-959 40-Channels Base CB Radio Logo

143 questions posted

Ask a Question

Usually answered in minutes!

Top Galaxy Radios Radio Communications Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18087 Answers

Mike Charette

Level 3 Expert

1847 Answers

Are you a Galaxy Radios Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Galaxy Radios Radio Communications

  • Galaxy Radios Radio Communications

Most Popular Question

stop frequency counter board in dx 959

  • Radio Communications
Loading...