I have the Python 473P remote... the remote is broken, need to replace. But, my Jeep was locked with the remote. I unlocked it with my key and set off the alarm. Now I can not turn off the alarm, nor start my vehicle. Is there a way to disarm or reset until I get a new remote? Any help will be greatly appreciated, since I can't use my vehicle!

Larry Spears

• 625 Answers
• Posted on Oct 28, 2010

SOURCE: The remotes for my system do not operate when I

The "pair" the remote with your system:

1.PRESS AND HOLD the f button on the remote UNTIL the transmit LED lights solid (approximately 10 seconds)
2.PRESS AND HOLD the remote start button (circle arrow) UNTIL the LED blinks 3 times and the amber transmit LED lights up. Your remote is now ready to pair.
3.. Turn the key to the on position
4.Within 5 seconds PRESS AND RELEASE the control button on the antenna.
5. Within 5 seconds PRESS AND HOLD the control button. The status LED will flash one time and the siren will chirp to confirm that the system is ready for remote pairing.
6. Press lock button on remote. System will respond with chirp toconfirm pairing.

SOURCE: python ce0890 FCC ID EZSDET474P RPN 473P 266

While our Dodge ram truck sits - the horn starts blowing. We think it has to do with the remote and the security. We have the Python CE0890 remote starter - it is a few years old.

Larry Spears

• 625 Answers
• Posted on Apr 27, 2011

SOURCE: Ordered correct replacement remotes for

The sequence is as follows: turn the ignition on, press and release valet switch one time. Press and hold valet switch, press lock button on remote. Release valet switch. Test system.