I have lg ww2242t screen flickers nvidia on toshiba tecra

cut means flicker screen , pls plug to external vga monitor and remove video driver.

Laptops have built-in graphics card on the motherboard and cannot be replaced with a different graphic card.
You can upgrade the RAM to 4 Gb and install a larger SATA hard drive.
This WEB site gives the specs of this laptop.
http://www.cnet.com/laptops/toshiba-tecra-a9-s9021v/4507-3121_7-32906197.html

The fault could be the inverter or the CCFL lamp.
To determine the fault and possible fix, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3598095-faulty_laptop_lcd_screen

The Toshiba M3 laptop has an Intel Pentium M 2. 13 GHz processer and 512 MB (DDR2 SDRAM) of memory (although it can support up to 2048 MB). The 36cm XGA TFT LCD screen supports a maximum resolution of 1024 x 768. The internal hard drive can store 80 GB of data. The weight of the laptop is around 2300g and the Lithium ion battery lasts for around 3. 2 hours from a full charge. This laptop has a NVIDIA GeForce Go 6200 PCI Express graphics and has Headphones, Sound card and Speaker(s) audio outputs.

if you go into safe mode (F8) on boot-up, does the graphics show up?? If so, it's the graphics board/chip on the MB. I have one and have the same problem - no amount of loading drivers, re-install BIOS, etc. would help. sometimes it works, but most times when you start up, shows the Toshiba logo, and once windows starts, goes to a black screen.

1st see from the bios whether you can get the graphics card in the agp slot or not.....try to take the display with out graphics card from onboard.......always check from bios....may be the card is not properly inserted into the agp slot

u need to open the monitor control menu by pressing the menu key on the monitor then select the option showing two bent arrows one facing up and the other down, then adjust.

its u r motherboard there some loose connection problem ..

doe syour lcd screen have pc input or dvi > also in your nvidia control panel u nee dto tell it add 720 p tv outto display manger always 60 hertz try differt resultion 1024x 768

no. i think your monitor is old. some time we get voilatie or red screen .some time it take short or long time. and some time screen moving. main cause is lose joint part in monitor it can be fixeb by soilding every parts by expert.for conform u change other monitor.then u can get result . thanks