P Harvey Posted on Oct 02, 2013

Jura X9 coffee machine is stuck in the heating up mode. How do I fix it?

1 Answer

Tushar

Contributor 9 Answers
Posted on Oct 21, 2013

Tushar

Contributor

Joined: Oct 16, 2009

Answers

Questions

Helped

12185

Points

Either there is issue with the Sensor or the Thermoblock. you'll have to replace either of these.

Sham Patel May 20, 2019

Hey Tushar - can you fix mine? 07467 261217

3 Related Answers

Anonymous

2 Answers
Posted on Dec 30, 2007

SOURCE: Jura Capresso Problem

check out this link:
http://www.kuntze.de/E/index.htm

Anonymous

13 Answers
Posted on Jul 05, 2009

SOURCE: Where can I find an Jura Capresso Impressa F9 replacement lid

The only sources I have been able to find are in Europe. They do not always wish to ship to the US however. In the US the dealers always want the repair, but seldome wish to sell parts outright. Try this website for parts.

Mike

www.juraprofi.de

Anonymous

1 Answer
Posted on Jun 17, 2010

SOURCE: Jura z5 after filling system said coffee ready

Someone online sells a special screwdriver head used to open the Z5. With it, it's possible to take the machine apart, clean up the coffee ground dust that gums up the moving parts. You can giggle sensor switches that get stuck. The water lines will need decalcifying eventually, even if you use the the Clearyl water filter cartridges. If you're not up to taking machines apart, sell me your broken Z5: [email protected]

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Jura X5 Coffee machine stuck in heating mode

If your Jura X5 coffee machine is stuck in heating mode, it could be due to a variety of issues. The thermal fuse is one possibility, but it could also be a faulty thermostat or heating element. Here are the steps you can take to diagnose and potentially fix the issue:

Unplug the machine: Before you start any work on the coffee machine, make sure to unplug it from the electrical outlet.
Check the thermal fuse: The thermal fuse is located near the heating element and may be covered by a plastic sheath. Use a multimeter to test if the fuse has continuity. If it does not, then it needs to be replaced.
Replace the thermal fuse: To replace the thermal fuse, you will need to open the coffee machine's housing and locate the thermal fuse. Remove the old fuse and replace it with a new one. Make sure to use a fuse with the same specifications as the original one.
Test the machine: Once you have replaced the thermal fuse, reassemble the machine and plug it back in. Test the machine to see if it is still stuck in heating mode. If the problem persists, it could be due to a faulty thermostat or heating element, and you may need to seek professional help to repair or replace these components.

It's important to exercise caution when working on electrical appliances, so if you're not confident in your ability to diagnose or fix the issue, it's best to seek professional help.

Read full answer

Feb 28, 2023 • Coffee Makers & Espresso Machines

0answers

Hello, i have a Jura X9 that is not bringing up any error codes but is stuck in the "machine heating up" mode and nothing changes it. 2 years ago i replaced the steam boiler sensor. Can you help?

Read full answer

Be the first to answer Mar 07, 2019 • Jura Capresso Coffee Makers & Espresso...

0helpful

1answer

My jura x9 says rinse fill

This happens when the machine is priming the thermoblocks(heaters) the machine is not registering water flow through the machine.blockage in water tank? pump not running? a thermoblock scaled up(blocked). first check the 2 flow meters in the machine located under the water tank. one of these may be defective or just stuck,

Read full answer

Aug 29, 2014 • Jura Impressa X9 Espresso Machine

0helpful

1answer