E 2800 PC Desktop Problem

If this is a LCD, you have a failing LCD panel. Typical of older Samsung sets!

is it the car can't idle and when you step on gas pedal the die?

You are going to need to start your computer in safe mode and find the XP drivers that will work for your motherboard manually from the web (Assuming that there are any created for XP for that board)..

That blue screen you keep getting is because you don't have the correct driver loaded for something on the motherboard that it needs to boot correctly and your XP install couldn't find it on the web to install automatically.

Start your PC and press F8 several times until the boot menu comes up. Then select "Safe Mode with Networking".

Now start looking for your drivers here:
http://www.dell.com/support/drivers/us/en/19/Product/optiplex-780

If this is a floppy disk then run a disk cleaner and then try to read disk. If it is a CD or DVD om Drive then buy a good CD/DVD cleaner disc and run it on your computer.

Hi Tony,
Its the Audio Connector. and it is supposed to be connected at the position marked as 1.


Let me know if any further clarification/ assistance is required.

Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

This could be an issue in group policy. As I'm not directly there to look at the way the network is set up, it could be a number of things. While I don't believe the systems don't run on top of Windows Terminal Services, and considering that it is a fast food joint, it is hard to tell specifically other than that they may have it set up to log off after a certain amount of time of inactivity.

I hope this helps!

Assuming that you mean Acer Veriton 2800 desktop computer, here is an official link for you to download the lan drivers you're looking for. Keep in mind that these drivers are for Windows XP op. system. In case your new op. system is different post me back to suggest solutions.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

I would suggest doing a Google search for the CMOS battery for your Axis 2800 PC...Jeff

It could be overheating - do all the fans work?

Hi,

Error Stop 0x0000007B can be related to viruses,hardware failure or a device driver issue.

Lets try this :--

Step 1- Insert windows XP disk and try to get into recovery console.(Can follow instruction displayed on the
screen)
Step2 - Once you login to recovery console, run chkdsk /p followed by chkdsk /r.
Exit the command prompt after chkdsk /r completes and restart your computer and see if that works,.

Step 3 - If it doesnt, try running a repair installation with windows XP.

Step 4 - Insert the windows XP disk, press enter to continue setup followed by press R for repair.

Step 5 - Let repair installation complete and restart your machine to check status of your computer.

Hope it helps !
Thanks