Evdo datacard is not working at apple machine please solwe my problem

It sounds like your Datacard SD260 is experiencing a problem during the initialization process. Here are some things you can try to fix the issue:

1. Press and hold the "Cancel" button while turning on the machine. This will perform a cold boot and may help reset the machine.
2. Check to make sure the firmware on the machine is up to date. If it is not, update it to the latest version.
3. Try connecting the machine to a different computer to see if the issue is with the computer or the machine.
4. Check for any loose or disconnected cables and ensure that all cables are securely plugged in.
5. Try a different power outlet or power source.
6. If the above steps do not resolve the issue, you may need to contact Datacard for further assistance or service.

It is important to note that, the above steps are general troubleshooting steps, and the actual problem can be caused by different things, so it is best to consult a service manual for your specific Datacard SD260 or contact the manufacturer for more detailed and accurate information.

Hai, What is your machine's problem? Please explain . Otherwise you try to put the oil all oil parts in your machine.

What model phone is this you need help with?

Yes, install the latest driver from Datacard.com and check your sizing and layout are compatible with card size. If fails save your img as a jpg and use the datacard softwarte

sam in evdo im using zte evdo bsnl
1-my one friend evdo is useless he give to me and se do r&d on this device
2-my other fried brought new evdo from bsnl office i just try to make clon of evdo for surfing
then i get sucess 100% both are working but from last two day my secend one is not getting network
but i try again and i had change the prl and switch to cdma mode then i get sucess secend time 100%
but now i want to make this device to orignal condition but esn is not changig like write protected but i had chandet many time now it making prroblem plz give me any suggetiin

Hello

Thank you for using FixYa for your problem


This link is for the driver or are you after software to make the datacard
http://www.datacard.com/plastic-card-embosser-drivers/275-embosser

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

I think EVDO is a type of network .

google tells me
is a standard for high speed wireless broadband. The acronym is short for "Evolution, Data Only"

so from this i can asume you shouldnt be connected to that network, as it is for High Speed Wireless Broadband (ie Mobile datacards, and wireless internet boxes for PCs.)

if you go into the network options for your phone, you should be able to scan for other networks and connect to them.
most cellphones support at least one of the following network protocols,
GPRS, EDGE, 3G , 2G, CDMA - if you can change to any of those you should be ok.

As I recall, the difference between the mono and color is the main logic board and RFID reader. To convert a machine you may be looking at $800 in parts alone.

have you tried this ? http://www.datacard.com/downloads/technical_support.jhtml?modelName=SP35+Plus
and it might not work in vista system

Boot camp was mainly for programs to work on the apple operating system, not for hardware to work. If you want to make it work on there you need to go on the internet to search for a driver to make it work.