Broken Remote I have an ILO tv; My remote broke, now I cant turn channels to play my PS3

SEE IF THE REMOTE HAS AN INPUT BUTTON OR TV/VIDEO

I called FUNAI CORPORATION
Customer Service
Tel :1-800-605-8453
http://www.funai-corp.com

I was told the only way to get it back to digital was to order a replacement remote. They told me there is no universal remote that will put the tv back to digital. If you want to order a new remote call the number above and choose option 4.

The GE universal remote #24914 works to change your Ilo tv from analog to digital and switch to vid1 or vid2 ect.... The code is in the book that comes with the remote. I use this remote myself. This remote can be bought at Target for under $10.

Get the 8.00 rca universal remote at wal mart (model rcr312w) follow the auto scan instructions and it will work.  I just had this same problem, bought 4 universal remotes and this one worked!

The only remote I was able to find that work all Ilo features is the GE universal remote #24914. The code is in the book that comes with the remote. I use this remote myself. This remote can be bought at Target for under $10.If you don't have satellite or cable you might need a digital antenna.

Please follow the steps below to program your remote control to equipment other then your DISH receiver:
Note: If you start this procedure and at any time and do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over again. Use the TV button for your TV, the VCR button for your VCR or DVD player. These Mode buttons are located at the top of your remote control.
1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release. 
2. Press the numbers 5-0-0 on the remote control. 
3. Press the Pound (#) button on the remote. 
4. Press and hold the correct Mode button until all mode button backlights illuminate, then release. 
5. Press and release the Power button on the remote control. 
6. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off. 
7. Press the Pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. 
8. To verify the code works try several different functions for that equipment. 
lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Have you tried running through the channels until they wrap around and start over again? Alot of TV's will throw the AV inputs in there before the first broadcast channels.

If not (and you're gonna hate my answer, but be kind to the messenger please!), you may have to purchase a new remote control from the manufacturer, which can be exorbitantly priced. Most 'Universal' remotes will act just like your Dish Network remote, and you will probably not be able to use any of your set's advanced functions through them.

I would recommend searching the web for the appropriate replacement remote control, you may get lucky on eBay and save a few bucks. Hope this helps!

I Believe You Can Go To Channel 2 And Right Below Those Channels Are The 3 Video Channels Turn On Your Dvd Player And Go Through Them. If That Doesn't Work Try Looking At The Buttons On Your Tv For A Tv Video. Make Sure You Dont Have A Tv Video Button On Your Remote If You Do Then Just Click It Till You Find The Appropriate Video Channel.

Try the keys on the set I would think there is a menu key there on the set to help get you out of favorite channels. Universal remotes don't always work as thought should be and usually onthe the devices remote will access all functions. Is our remote dead or busted? Try opening it up look for bad solder on the circuit board clean the switch contacts on the the board it may just fix it

I have the same problem.