Can't get Internet service with my d-link router

plug the usb modem into usb slot of pc as normal.
Bridge the connection between the internet connection and ethernet router connection in network page.
Set router to ip add etc and it should share net access while pc is turned on atleast.

you may wanna contact your service provider. and ask if they see any issues on thier end and if not support you to get your connection back up and running

I have had exactly the same problem, and although I didn't suspect it, all my troubleshooting including reinstalling of drivers, trying a different USB port and changing the channel on the router failed to cure the problem, pointing to a hardware issue. Indeed, a new Wifi USB dongle proved to be the full solution. I confirmed my old dongle was faulty by plugging it into another PC. Original problem was transferred to new location, confirming donglewas bad.

try checking the channel number of communication

check to see if the router has been enable on the broadcasting mode

do check if the router has been configured for WEP or WPA

check to see if the access is based on MAC address on the router

finally place the connection from the modem to the router in the ports numbered 1,2,3,4 instead of the INTERNET/WAN port and try connecting

try with wire first
if this works then check wireless network settings on pc

should be set at dhcp, which means router will issue ip address to pc automatically.

check first with simple password the with real one

http://en-us-support.belkin.com/app/answers/detail/a_id/3180
check this link

you need service pack 3 as this sees any connected media that can be accessed from the programmes menu>accesories>system tools or download programme from here to set up xbox/pc streaming.

As for the Trendnet ensure that the pc it fitted to is not set to dial a connection, open IE and then tools>internet options>connections tab and select never dial a connection or it's greyed out.

Then in the properties of your wireless adapter select the TCP/IP line>properties and tick 'obtain an ip address automatically'.

Unplug the plug (from phoneline) on back of USB modem, plug into Zoom router. Plug one end of an ethernet cable into router and one end into your PC. Type http://10.0.0.2 into a web browser (eg. Firefox or Internet explorer) username/password is admin/zoomadsl go to basic setup and input your ISP username and password (the one given to you by your internet provider) under PPP. Click configure my connection. Save changes and then write to flash (both buttons on bottom of page)

You can go for a wireless router, so that you can access internet anywhere in your house, ,

for dial up simply a modem .... on laptops if you do not have a builtin modem you can purchase a pc-card modem that goes into your pcmcia slot ... for highspeed either a ethernet (same option as modem) but almost all modern laptops have a built in ethernet ... or usb ... also I highly recommend a router if you are going highspeed ... even if you only have one computer ... a router will protect your system because it provides a NAT firewall. If you go with a router make sure to set up the internet connection on the router do not tunnel through the router with a PPPoE connection