Is there a repair shop for gaggia in utah

You can buy one from america. http://www.shop.partsguru.com/Gaggia-Accademia-SUP038G-Service-Manual-SUP038G-Service-manual.htm Ive got a problem with mine too and thats the only one i found so far

see this causes and fix it. God bless you
Reset the code read your instr. manual

If the coffee maker doesn't work at all, make sure power is on at the outlet, check the electric cord, the internal fuse or the thermostat and heating elements replace as needed.

reset the error code and read your instr. manual. God bless you
proceed according.
If the coffee maker doesn't work at all, make sure power is on at the outlet, check the electric cord , the internal fuse or the thermostat and heating elements replace as needed.

Have you adjusted the pushrods properly? Pushrods generally need to be adjusted after installation.

Not sure how to do this on this model, although I own a 94 Ford Explorer with the V6 4.0 Liter motor.

Basically, when a gas engine doesn't run, you check 4 things, and narrow it down from there.

1. Gas (Is gas pressure good, is gas flow strong enough?)
2. Spark (are all spark plugs firing properly? Is spark strong enough)
3. Combustion at each cylinder (timing, pushrod adjustment)
4. Air Flow (MAF/MAP sensor working? Air Filter dirty?)

Appliance Repair Utah

Here is a breakdown of the machine, try descaling and check lines for blockage, also check/clean the shower and the wand nozzle.

Make sure portafilter is warmed up before checking or check without portafilter, descale boiler, and check to make sure thermostat and element is working properly, do a resistance test.

First where are you located then check the support list for gaggia repair agents at importika.com, if there is no one close and it is not under warranty find the nearest espresso machine dealer or repair company in your town.

You are in luck! Utah is home to Precision Time. They are one of the largest watch repair chains in the country and they are an authorized invicta dealer. Go to PrecisionTimeCo.com.
Just about any watch repair shop should be able to help you with this small order.

Yes it can be repaired if you have the parts, you will need the complete steam valve with the o-ring that connects to the boiler check the diagram below.

The units are best dropped off to a service agent.
Check the yellow pages or google for your closet repairer