Hello, I lost my manual for the new Mastercraft Multi-crafter Tool Kit. Never used any tools or know how. Can you please respond to this add and ship the manual to me, or maybe I can print it on line at some website. Thanks Jerry Hanlan

Question edited for clarity and spelling 'witch' = lady in pointed hat with broomstick for transport.

There is very little on it and no manual. I did find a manual for the 6715 model and although it has a parts list, it has no wiring diagram. It should have live, return and ground going in and a pair of wires to the motor and a pair of wires to the light. An electrician in a machine shop or tool repair shop would know.

There is a Helpline number on Page 23

https://www.manualslib.com/manual/1172186/Mastercraft-055-6715-4.html#manual

https://www.google.com/search?q=mastercraft+55-6709-0+wiring+diagram

Tool Repair

https://www.google.com/search?q=tool+repair+near+me

..

go to harbopr freight get the fittings and add them on your tool

If you need further help, reach me via phone at https://www.6ya.com/expert/scott_8b3f0f0fc5f566a7

https://www.manualslib.com/manual/1104628/Mastercraft-54-8333-2.html

A quick Google search revealed lots of places with parts, but with a sales price of $69, it may be better to buy another one, as then you will have lots of spares for it. If not, link to manual:

http://powertool.manualsonline.com/support/other/drill/manual-for-mastercraft-rotary-tool-parts-model--5442787

you just turn the switch to "V'' and it should be DC voltage.... then connect probes of multi meter to both terminals of battery and you will get to know about its voltage...

Hello, W/D here.

The general rule of thumb is to let the machine do the work. Applying more pressure than to guide the tool doesn't make it work any quicker. It only contributes to wearing the fittings and blades faster.

Best regards, --W/D--

Yes, i agree with u, their price is a killer with shipping charges. I purchased one n repaired my broken valve, which I was quite happy with the result. I kept my broken bcd for awhile believing I can find some way to fix it. I have seen a few diveshops who does patchwork but decided against it until I was in phuket recently when I saw this scuba fix repair kit used on one of the dm bcd. He said best repair ever! I look at it, It looked like the repaired valve will outlast his bcd!
I bought 2 sets for 5000 baht works out around $160.

Check with Harbor Freight (online) they carry Mastercraft tools and they have a section of manuals downloadable PDFs

Those digital dremel's are touchy when the get hard use. learn to use it without the display or try to return it regardless if it spins, it's fine.