When I tilt my iPod touch it does nothing. I can't

Unfortunately, your warranty only covers factory defects. What you are looking for is Insurance on the device, which in turn, would cover water damage and other accidents.

I am afraid your Warranty will not cover the repairs or replacement of your iPod.

Sorry.

It's possible the battery just died, I would first try just charging it. If this doesn't work plug it into your computer, it might need a jump start. If all else fails, redeem the warranty.

you just may need to get a new one becuase it is no use of that ipod either you will not have one or get a new one.

Thus was just happening to me and I turned my iPod off for a day or two and then turned it backon

Some Pure-Fi's has a problem charging 2nd Gen Touch iPod, even when proper supplied adapter is used. You can try pressing the iPod further into the connector and see if it stays charging. If not, you can tilt the Touch slightly forward to make proper charging contact with Pure-Fi's iPod connector.

If you only charge your 2nd Gen Touch in your Pure-Fi, or other devices less thick than the Touch, like iPod Nanos, then you can stick a spacer on the Pure-Fi behind the Touch to always properly tilt it slightly forward. Only space it slightly forward just enough to cause it to charge so as not to stress the connector.

Stick-on chair/furniture protectors work good for this. If they are too thin, stick one on top the other till you get the thickness you need. Do not use any thicker a spacer than needed so as not to stress the connector any more than needed to make charging contact Use thinner stick-ons, like double sided foam tape, to get the final spacing you need.

The added advantage to a proper spacing between an iPod and Pure-Fi, is it relieves connector stress when plugging in and using an iPod while plugged in, since the taller Touch iPod cannot tilt backward. If you place your spacer at the very top of the Pure-if back panel, then iPods thicker, but shorter, than the height of your space can also be used.

Hope this helps everyone with this irritating Pure-Fi design problem.

To view the charging/not charging status on the 2nd Gen's screen, turn off the 2nd Gen and the Charging Icon will show when contact is being made.

becuase you have to have itunes downloaded then hook it up to your cpu

Plug the thing in for 6-8 hours to totally charge it.  Then try.  If nothing, congratulations cause you have put this thing into paper weight mode.  This means you dropped it or it got exposed to liquids.  Apple won't replace your ipod for either of these reasons.  If your just an unlucky bastard, and really got a defective item, then you can take it back to the Apple store for a free replacement if your under the one year warranty.

return this to apple. call 1-800-my-apple
this is an issue with the Firmware and will need to be reset, nothing users can do without voiding warranty.

Hi dballd,

generally the ipod touch will only respond to a finger moving across the screen.

Your problem however is a known hardware fault. Take it back to the store you purchased it from or preferably an apple retail store, and they should replace it for you on the spot. Just inform them that you have updated and restored the firmware several times.

It must be under warranty though. You have one year from the purchase date, unless you also purchased applecare.

Hello! This problem is if you messed around with your iPod Touch a lot like hacking it. I hacked it before so I restored it so now it is very good! It is now version 1.1.2. Okay, if you want to fix this problem, hold the home button and the power button for 20-30 seconds until a yellow exclamation mark shows up to tell you to connect to iTunes, this worked for my friend's screwed up iPod Touch. Try this method okay? After you connected it to iTunes, check for updates right away and there you go!

Hope this works!

Nicholas