20 Most Recent
Electrolux 30" Self-Cleaning Slide-In Double Oven Electric Convection Range - White - Page 9 Questions & Answers
Range controls light up but do not work. Left side
Good Morning Jerry, thank you for your question! Let's try
resetting the range by either unplugging it or flipping the household circuit
breaker off. It is important to wait roughly ten minutes and then turn the
appliance on. If resetting the unit does not correct the issue, than there is a
possibility that the oven is experiencing a communication problem with the EOC,
a potential wiring failure, faulty element/burner. Because
it could be a number of any one of several underlying causes, I would recommend
contacting a professional to properly diagnose and repair the unit.
Thanks for allowing me the
opportunity to assist you!
Electrolux stove
Reset the unit at the circuit breaker for 10 minutes and retry. The ? mark is a beginning stage of an error code that might display. Let me know what else is does after the reset.
I have anElectrolux EDC47130W sensor
I think that there are errors on the program controller . As your set is new I would suggest that no tampering be done but the matter reported to the Electrolux dealer from where you had bought the machine for th privilege service under warranty.
Sometimes it might be better to register the service as the warranty gets void if tampered.
Not finding what you are looking for?