20 Most Recent Canon imageRUNNER 3300 All-In-One Laser Printer - Page 6 Questions & Answers

Replace the DC Controller

this model pdf output is slow. no way to come fast.

i wann harddisk format software

Its means 33/ppm.

my dear your heater flim problem

my dear you chek wire cable penal or motherboard

my dear you chek heater unet

My canon ir 3300 shows error e-000003-0000 how can i solve this problem

Hi,
E585
At the start of the motor CCW operation, the stack handling motor (M2)
may be driven for a specific number of rotations; however, the stack delivery
lever home position sensor (S8) does not go ON.
Cause:
The stack handling motor (M2) is faulty. The stack delivery lever home position
sensor (S8) is faulty, the connector is disconnected, or an open circuit
exits. The stack handling motor (M2) relay harness is faulty. The return
roller is faulty

First try to replace motor.

Hope that helps!

Hold down the 1 & 9 buttons on the keyboard and
turn the machine on using the switch on the side of the machine
hold down the buttons till the screen goes black a white square appears now take you fingers off and let the machine run untill the screen is filled with the white boxes. turn of and on and hopefully that will fix it. the error is caused but the hard drive being currupted. if this does not fix it then the hard drive needs to be replaced by a canon service agent.

problem with fixing unit. Main thermistor or fixing heater is faulty.To clear error u have to execute it in service mode:COPIER<FUNCTION<CLEAR<ERR

scaner and composite power supply

http://www.scribd.com/doc/56387774/iR-3300-Code-List#scribd check out this site gives you all the error codes for this model

Replace feed rollers

Replace the horizontal registration motor