20 Most Recent Canon imageRUNNER 3300 All-In-One Laser Printer Questions & Answers


error e000007-0000

Canon... | Answered on May 29, 2019


ont. Panel, press the following, one after the other, * (additional functions), 2, 8, * (additional functions). You are now in Service Mode. Touch the Function Tab, touch the Clear button, touch the ERR button, when it is highlighted, press the OK button at the botton of screen. Power Cylce unit. If it comes back up, may have been a fluke. However, if it comes back, check your Fixing Assy for jammed paper, or damage to the Fixing Film (Upper Roller). Replacing the Film is not hard. After you remove the Fixing Assy., its a couple cables and springs. Rather on the easy side for Film replacements. Remebmer, on these models, the Film is also the Heater and Upper Fixing Roller. The Film is most likely on the pricey side for new, believe you can find rebuilds. Just keep in mind that the Film is still a lil' bit cheaper then the whole assy., and 8 out 10 times, its the Film that fails in the asssy

Canon... | Answered on May 02, 2019


check the finisher

Canon... | Answered on Mar 17, 2019


ir 3300 my error 0000000

Canon... | Answered on Dec 26, 2018


Image Runner 3300 or (iR3300) copiers do not come with print/scan OPTIONS installed. These functions must be enabled by installing the correct 'kit'....same with fax option...again, these were 'options' when this machine was introduced, no print, scan, fax,...unless options were added to it. Yes, the buttons are there, however.....

Canon... | Answered on Dec 13, 2018


top glass error or ccd,or mirror adjustment

Canon... | Answered on Dec 04, 2018


canon ir3300 error code E000019-0000, hOW CAN I SOLVE IT ???
NO KEY IS FUNCTIONING NOW.................
mail at chandaxerox@gmail.com

Canon... | Answered on Nov 13, 2018


error e000021-0220

Canon... | Answered on Nov 04, 2018


Remote UI probably has not been installed on copier. Get a technician to come out and use SST to load RUI onto your copier. They should upgrade firmware to latest version at same time.
Don't forget you can also pull scan over the network using Canon Network ScanGear Tool in case you would like to scan.

Canon... | Answered on Oct 16, 2018


ERROR CODE E000602-0003 what i do

Canon... | Answered on Oct 13, 2018


Fixing temperature abnormal rise
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power. 2.Check connection of the Connectors (Thermistor Connector and AC Connector). 3.Replace the Fixing Main Thermistor (Film Unit). 4.Replace the Fixing Assembly. 5.Replace the DC Controller PCB (PCB4)..

Canon... | Answered on Sep 24, 2018


Clean rollers of debris

Canon... | Answered on Sep 23, 2018


RERA registration is applied on all real estate projects therefore all builders, real estate developer and entity associated with the real estate project is required to submit RERA registration application with the local authority on their official portal. RERA registration in Gurgaonis introduced to eliminate the chances of any discrepancy, irregularity in real estate development industry. We are the leading consultants for RERA registration in Gurgaon with expert professionals to handle the issue.
https://www.gsbtaxation.com/in/rera-registration-in-gurgaon
rera-registration-local-page-image-xonnxywycruvgf353ghg4yl5-2-0_0.jpg

Canon... | Answered on Sep 19, 2018


Hello,
E051
0000 At start-up, home position is not detected when the horizontal registration
assembly is moved 100 mm in the direction of home position.
Main cause The horizontal home position sensor is faulty. The horizontal registration
motor is faulty. The DC controller PCB is faulty.
Action
1. Connector
Are the connectors of the horizontal registration home position sensor and
the horizontal registration motor connected?
a. DC controller PCB (J304) relay connector horizontal registration
home position sensor
b. DC controller PCB (J304) relay connector horizontal registration
motor
NO: Connect the connectors.
2. Sensor lever (damage and interference), Sensor
Is abnormal noise heard from the horizontal registration assembly in keeping
with the motor rotation?
YES: a. The horizontal registration assembly is out of place because of
damage to the sensor lever. Replace the sensor lever.
b. The horizontal registration assembly malfunctions because of the
presence of foreign matter. Remove the foreign matter.
c. The sensor is faulty and cannot detect home position. Replace the
sensor.
3. Horizontal registration motor, DC controller PCB
Is the horizontal registration motor control signal generated by the DC controller
PCB?
J304-1/2: 24 V, J304-3/4/5/6: motor excitation signal
YES: The horizontal registration motor is faulty. Replace the motor.
NO: Replace the DC controller PCB.


As You can see, is better to call service.

Hope that helps!

Canon... | Answered on Sep 19, 2018


Code
E805-0000
Description
Fan error
The Fan was locked for a specified consecutive period of time.
Remedy
Check the connection of the Main Fan. 2. Replace the Main Fan.

Canon... | Answered on Sep 11, 2018


how to problem with eror code e000000

Canon... | Answered on Sep 04, 2018


RESETTING CODE E000003-0000 ON CANON IMAGE RUNNER 5000 COPIER

Canon... | Answered on Aug 14, 2018

Not finding what you are looking for?
Canon imageRUNNER 3300 All-In-One Laser Printer Logo

1,163 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2237 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

copier canon ir3300 error e000003 0000

  • Office Equipment & Supplies
Loading...