Packard Bell - 160141 - Pac Speaker Pkg Whd Phone Jack - Answered Questions & Fixed issues
How do i connect speakers to PC ?
If you have WS media player its automatic once you connect the speaker jack into the audio hole...dont forget to check if your speakers require power, plug them and increase the volume to an audible level.
If after all above has been done and no sound go to: Control Panel+ sound+ sound and click the drop down so you are able to change the option to windows default...click ok and apply. Then close and re open windows o play sound.
4/24/2014 2:24:29 PM •
Packard Bell...
•
Answered
on Apr 24, 2014
•
111 views
Audio key 256mb lost
The issue quiet short, and I am not sure how to start on a solution, it would be fine if I may need more information so that I can give you a precise solution?
Thank you.
9/9/2011 11:17:41 AM •
Packard Bell...
•
Answered
on Sep 09, 2011
•
91 views
I recently bought the Studio
be sure it is powered and on when you connect it ..and also the driver was installed into computer ...after that if it doesn't detect it ...run the add new hardware wizard from the control panel ..and select the already added feature..and see if it detects it ..If it do not came with a driver ..t means it is a plug and play device and it will be seen and installed auto ..
after that you should see it in the my computer folder as a drive ..(removable ) ..
al so be sure you confirm the connection with the p con the player if it asks ..(or take a look if it has a pc connection mode on menu or like a button feature)
1/4/2011 8:28:49 PM •
Packard Bell...
•
Answered
on Jan 04, 2011
•
247 views
Recording from baby monitor
I am assuming the model you are using is similar or the same as the model I used once. That being the case, you need an external recording device and you simply use the headphone jack to connect the two. You should be able to use your computer and some simple recording software.
7/21/2008 11:19:37 PM •
Packard Bell...
•
Answered
on Jul 21, 2008
•
90 views
How do I change to degree mode on my porpo YH-2000
- Power Off: Turn off the device.
- Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
- Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
- Power Off Again: Turn off the device once more.
- Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
- Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.
If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.
Openfit Shokz battery replacement?
Question edited for clarity, typo and CAPS.
Question moved from Cars and Trucks category.
Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries.
How long is the warranty on AfterShokz?
While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase.
Jan 11, 2019
https://www.google.com/search?q=Openfit+Shokz+battery+replacement
..
My roadking rk4000 wont charge. I turn it off to charge it but there is no indicator light at all, any suggestions?
Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first.
But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.
Can f2100 remote work on my dishtv box?
The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.
Audiosonic CR-06PL not changing time when following manual instructions.
Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min.
How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .
Not finding what you are looking for?