20 Most Recent Haier TN201AUV 20" TV Questions & Answers

You didn't mention the make or model so this is just a guess, its in close captioned mode

Two probable points; either the loss of the service voltage for the high voltage section or a failure in that section.
The circuit that produces the high voltage for electron beam acceleration also produces the sweep for the horizontal movement of the beam, in other words, if this circuit fails or the voltage it needs to operate is gone, no picture, but the audio still functions.
Because of its Chinese origins, there is a chance that critical specialized parts may still be available for it or, if you are lucky to have a tech competent to repair standard TVs, he may find a less critical part that has failed and readily available.

To reset the TV to its original factory settings, you have to enter its service mode. If you wish to get more, check this link. http://electronicshelponline.blogspot.com/ Pull up previous posts, either by entering the brand name to your device in the search box of the display window, or view it in Mosaic / Flipcard / Timeslide option.

Ernesto cuadra can you help me?

Check the interconnection cables for firmness. Check the audio inter connection cable for internal conductor break. Check with a new cable.

Hello, you may have already gotten this resolved, but here are some steps to run through if you have not, or if you have further questions. Follow the link below, and that remote will be working with the volume in no time!!

http://www.dishnetwork.com/SupportSection/power-scan-instructions

Becki Barned
DISH Network Customer Service

Hello


Universal remote code for Haier TV with Philips universal remote model [CL 034] are:-

0709 0223 0323 0317

Direct Code Entry

1. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

2. Press and release the desired Mode

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Enter the 4 digit code from the code

tables. Note: after a valid code entry,

the red indicator turns off. For an

invalid code, the red indicator

flashes.

4. With your device on, press

CHANNEL UP. If the device

responds, no further programming is

required. Note: If some buttons do

not operate your device, try one of
the other codes for your brand.

Connect as following
1. Set top box - RF cable from STB to antenna socket on TV.
2. DVD player output to Video1 on TV
3. VCR output to Video2 on TV.
May be you can route VCR through the DVD player or viceversa. That you can see and try on ground.

Hello. Hi, The parental control is on in your TV, To unlock the parental control on your TV, that has a blue screen and a red padlock on the top left hand side, hold down the display button on the remote for 10 seconds . And once you get into TV, you can switch off the parental control by to menu using the remote and child lock.

If your remote will not work for this procedure either get a replacement Haier remote or get a logitech remote. Both are available on line. J.

search on google for your model, we can't help you if you don't provide us the model, yar and serial number

Get it from a TV repair shop

hi i have a universal total remote control for a tv nned a code for a goodmans tv

Keep it unplugged for an extended period of time. It should lose all of it's settings unless its a really new TV.

try getting a cleaning kit from radio shack for 15 bux the lens maybe dirty

An RCA Universal remote with the "code search" feature solved my problem. acheapskate