20 Most Recent Hitachi C25-RF35S 25" TV Questions & Answers

press one time display key and three times mute .service mode will open

Since BPL uses Sanyo kit, service mode entry method to Sanyo should work with it. To get some details, http://electronicshelponline.blogspot.com/ Pull up older posts. Service mode entry method to many brand TVs including BPL models are given.

Set volume to '0'. Simultaneously press Display button on the remote control, and Volume - button on the TV set to get into service mode. The is one way. The procedure will differ with models to models. If you wish to get more, http://electronicshelponline.blogspot.com/ Check this link. Pull up older posts there, either by its left side bar, or see it in Timslide option.

if you have cable ask your supplyer if youneed to pay for the channel to come back on.

You can not open the service mode without remote as there is combination of remote key with TV panel key.

Evilgenius - thank you thank you thank you!!! I've had that stupid code on the screen for the last year and even Hitachi couldn't tell me how to get rid of it! I used your directions about removing the r/c flap & pressing the tuning button. You have made our day - thank you!!!!!!

simply run auto search function to scan the channels

this is a job for experienced tech maybe your horizontal circuit is bad there is a blue capacitor that is comom go bat and short horiz. out transistor

I own a One-for-All universal remote (model URC-4220), and my booklet says the setup code for a Hitachi TV is either 0000 or 0145. If these numbers do not work, then I would buy a newer universal remote. They can purchased at Walmart for less than 10 dollars.