2003 Suzuki RM 125 "kill switch" Questions

...kill switch... but my bike is stilll not getting a spark ... what do i do? Check the side stand kill switch, battery, wire connections, neutral switch and clutch switch if your bike has one. If still ...

...If the bike uses a 'kill switch', check that it is not broken or shorted out to the bars. If it has an ignition switch, the switch may be defective. Look for damaged wiring around any of these

kill switch on? Does the side stand have a kill switch? Is it working properly? Tip-over kill switch on your bike? Check the operation of the ignition switch and all kill switches with a volt ohmmeter

no spark on rm125 1996 did you check to see if it had spark with the kill switch unplugged?

...or it was out of gas but when i was changing the spark plug i seen it was not getting spark what do you think it could be? Blown fuse, bad or loose side stand kill switch, loose wire or abraded

...kill switch it keeps running on. There does not seem to be any adjustments that can be made from the outside. The clutch has to be engaged to stop the thing from running. So, we have gone from ...

...kill switch. 2.check the resistances in the high tension coil. Primary around 0.6 ohm, secondary around 15~20k ohms. 3 . check the output source coil , black/red~ red/white it should carry about 20~ ...

...mix oil brands! use a TOP quality oil as its the only insurance you can apply to it! [ cheap oil kills engines] use what you can afford! & stick with

...KILL SWITCH IS NOT GROUNDED AND THE FLYWHEEL SPINS. WHAT SHOULD I DO NOW? Hi and welcome to FixYa, Initially, test for the presence / absence of below described voltages using an analog / needle type ...

...kill-switch should be in the working position, the key should be in and turned and of course there should be enough fuel in the tank. Sometimes and especially during cold weather you may need to turn ...