2007 kawasaki Balius - II "replace timing cover seal" Questions

Ad

Question about kawasaki Balius - II Motorcycles

1 Answer

cover off and all the plumbing that goes with it. Be sure that when you put the new water pump seal in not to put any lubricant like oil or grease on it. This is a ceramic seal and oil or grease on it

Ad

Question about kawasaki Balius - II Motorcycles

1 Answer

cover to replace the seal. K & L  makes a gasket kit for your machine that has all the gaskets and seals to repair the leak for around $25 US. You may want to replace the water pump ($125) at

Ad

Question about kawasaki Balius - II Motorcycles

1 Answer

timing gear that is easy to replace (I have replaced two of those when the same leak appeared.The seal is part #28. http://www.bikebandit.com/houseofmotorcycles/1985-honda-gl1200i-gold-wing-interstate

Question about kawasaki Balius - II Motorcycles

1 Answer

cover removing the impellor and then gently tap out the seal, replace in the same manor, replacing ness gaskets, the oil and filter will also be removed and replaced and a new gasket will also be ness

Question about kawasaki Balius - II Motorcycles

1 Answer

...cover then rattle gun off the impellor only replace the water seal then install the impellor and cover back on then ride away! this will work and will fix the leak but is definitely the incorrect way ...

Question about kawasaki Balius - II Motorcycles

1 Answer

...replace but now has a compression issue. rings are in good shap. question is it said to not use rtv on the seal. is that the issue? Recheck valve timeing, if you used. Rvt on the rocker cover seal, ...

...replace the casing (cover) but whatever you do do not overheat that engine with that engine the barrels are part of the engine and cannot be replaced and if you overheat that engine the engine warps ...

Question about kawasaki Balius - II Motorcycles

2 Answers

cover off and all the plumbing that goes with it. Be sure that when you put the new water pump seal in not to put any lubricant like oil or grease on it. This is a ceramic seal and oil or grease on it

Question about kawasaki Balius - II Motorcycles

1 Answer

...replace both rhe master and slave ctlinders. They are elatively inexpensive opposed to your time annd wasted flui and tim. When you bleed the system open the bleeder at the slave cylinder and let the ...

Question about kawasaki Balius - II Motorcycles

1 Answer

...seal? Check this by popping the dust cover off the lower legs and if you see fork oil on top of the seal than it has gone dad and needs replaced. Adding oil to the forks will stiffen then back up but ...

Not finding what you are looking for?
2007 kawasaki Balius - II Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...