my 2006 zx14 runs like water is in the tank Runs ruff when i take off n slow down Had a similar problem on gsxr. ended up being a faulty plug , it ran rough at low speeds. Cheers.....
...rough cold or hot and acceleration good but lacks smooth running @ Hi, Daryl and the usual suspects are: 1. Idle speed improperly adjusted. 2. Air fuel mixture screws not properly adjusted. 3. Inlet ...
low rough idle speed , back firing when slowing down or gearing down runs great at higher speeds and idles after it warms up but idle speed is very low. thank you Check for an air leak at either the ...
Question about Motorcycles
...low end is rough and misfiring. What do I check first? Had the carbs rebult twice. Something got missed in low speed circuit or incorrect pilot crew seetings, also check for intake leaks rubber carb ...
Question about kawasaki ZX-14 Motorcycles
runs rough at low speeds pops through air cleaner at idle idles low no more adjustment Sounds like restricted slow speed circuit of the carburetors.
Question about kawasaki ZX-14 Motorcycles
...put old jets back in, still running rough so I put the new jets back in balanced carbs changed plugs and leads no change can you help Air leaks into the exhause can cause backfiring on the
Question about kawasaki ZX-14 Motorcycles
...rough running but it still lacked power. ( flat out at 80kph.) Is it the cdi unit or something else? Hi there, you likely still have the restrictor in the exhaust header. Mine was the same, they are ...
running rough My 2000 Monster 750 is running rough at low rpm. It is running rich(black smoke/flame) fouling plugs and backfiring. Runs much better at high RPM's. I realize that the problem is likley ...
running rough My 2000 Monster 750 is running rough at low rpm. It is running rich(black smoke/flame) fouling plugs and backfiring. Runs much better at high RPM's. I realize that the problem is likley ...
running rough My 2000 Monster 750 is running rough at low rpm. It is running rich(black smoke/flame) fouling plugs and backfiring. Runs much better at high RPM's. I realize that the problem is likley ...
67 questions posted
Usually answered in minutes!
239 Questions
197 Questions
175 Questions
157 Questions
126 Questions