2000 kawasaki ZXR 400 "idle" Questions

...ones, my main problem was old varnished , gel like fuel traces which had built up from bike being idle over winter. Once i completed this i reassembled and the bike idled steady and also revved ...

kawasaki 300 bayou won't rev up. hi, i have a kawasaki 300 bayou.cleaned carb, new cdi. starts and idles great but when you try to give it some throttle it just starts popping and back firing. is it ...

...to my left tillit stops then turn it 2 my right 1 and a half times ?????? No you are confusing the idle screw (a thumb-screw) with the air/mixture screws, these are turned inwards (clockwise) until ...

Kawasaki bayou 300 will idle ob but will not rev up cleaned carb same problem that I have conneced inquirey with try playing with the mixture screw on the carbs this pic below will help you buddy get ...

...3/4000 revs) the bike would cut out. Its an electrical problem Im sure but what?? It will start and idle no problem. Iv checked rectifier and 12v when running. Possibly a coil has broken down...... ...

...the pipes together and replace any perished rubberised band that may be used. Run the motor on idle for about 10 mins to harden the paste and the leave overnight. Recheck the clamp for tightness ...

it idles fast if I turn the idle down it stalls running rich on top end at fast idle sometimes it will drop to a very low idle and shut off adjust the idle mixture screws first and then adjust the ...

2010 Honda Fury how to adjust the idle speed it is on idle at 1100 rpm when at operating temp@ To adjust the idle speed on a 2010 Honda Fury, you'll typically need to locate the idle adjustment screw.

carb problems my idl is to high and i think my Air/fuel ratio is off Ok, lower the idle and adjust the carb to best idle and turn down the idle and readjust the carb to best idle. back and forth till ...

wont idle how to adjust carb Make sure your spark plug is not fouled and the gap is correct, also air filter is properly cleaned. If it still wont idle, locate the idle adjustment on the carb. There ...