2005 Honda VT 750 DC Shadow Spirit "remove replace head light" Questions

...unscrew the bulb holder , and remove the bulb from the back of the lens . Replace with new bulb being careful not to touch the glass with your finger. Oil on the bulb can shorten the life of the

...- no dice. Any ideas on what I should check? Remove the head light bulb, replace the fuse and thn start...see if the fuse will blow. Check the head light wiring for short-circuit. Hope

Headlight is burnt out Replace it Take trim ring off head light phillips screw remove trim ring 4 screws on head light remove them light comes out pull back rubber replace bulb MOPAR KENNY

...replace head light lens on 95 Honda GL1500. How do I remove plastic lens of driving lights? you have to remove front side of fairing. then there should be platic clips on the head lamp but dont think ...

...Remove head light and mounting, clocks. take off the top yolk. the ignition is held in with screwed rivets, you need to drill off the rivet head and it will come off. take out the screws, a small set ...

...head light itself needed to be removed in order to gain access to the wiring inside the headlight assembly. Once inside I was able to unplug the two wires which lead to the signal light and then pull ...

...head light no starter buttton. Will not jump start. New battery and fuses ok. Popping 10amp start/ing fuse when jumping. Has high beam no low. Replace the starter button. Unfortunately this means ...

...replace headlight? skipper [email protected] I just replaced mine about 30 min. ago. There are two Phillip head screws at about 4 o'clock and 8 o'clock on the main body of the head light. Do not ...

...remove and replace back signal light on 1996 yamaha virago should be 2 phillips head screws recessed in rear signal lens,remove them,then twist bulb while pushing in counterclockwise,reverse to ...

remove the bulb and inspect the element inside the bulb and insure it is not broken if so replace it if your new bulb is a halogen bulb do not touch the glass on the bulb to avoid hotspots on the bulb