Peavey XR1212 12 Channel Powered Mixer "connecting amplifier" Questions

how do you install the hk-401sx amplifier? A 4 Gauge or even better a 2 Gauge power cable Starting from the Battery going thru a fuse block which should not be more than 12 inches away from the ...

How do i wire three ma audios 12" to one hifonics brutus 2000 watts amp? at 500rms each speaker? what is required? Firstly, lay all 3 speakers face down next to each other. Note the connections +- +-

trying to hook up amplifier to after market 6by 9 using factory radio how do i wire an amplifier to a factory radio or can i hook the rca jacks to the speaker line that i am no longer going to use? ...

connecting the amplifier, I connected ground on the amplifiers + input, but i discovered it before connecting + on the amplifiers ground input. I have also tried an other amplifier, and it works well,

Help Do have to hook RCA Wires to the input and Output section on a Jensen A600HLX Amplifier? No. The amplifier gets its signal from the RCAs connected to the "input" jacks, but the "output" jacks are

connecting the positive pole of car battery with the negative pole of the amplifier and the negative pole of car battery with positive pole of amplifier and the amplifier did not give anymore power or

How can I connect it to get the most power out of it? I have two twelve inch 600 watt sub's but don't think I'm getting maximum bass What load is the amplifier designed to drive? It will only deliver ...

alpine system in car has no sound It shows the system is working. But the amplifier in trunk has no light on. No sound from speakers. I checked fuses near battery. They seem to be good. Your amplifier

amp heating up __Amplifier Heating__ Causes: 1-insufficient air circulation to the amplifier where installed 2-incorrect speaker connection (out of phase) 3-overvoltage of amplifier 4-insufficient ...