Question about Harley Davidson XLH 883 Sportster Motorcycles
intake cam. The diagram below is for a WR250. I don't have a manual for an rmz250. Your cams are probably the same. Note that the caps should tighten to only 7.2 Ft lbs. (10nm / 1.0 m-kg ). Many other
Question about Harley Davidson Motorcycles
intake ) the next shortest goes in the FI the next shortest goes in the RE and the longest goes in the FE. Rotate the engine until the lifters are at their lowest point of the cylinder you are working
Question about Harley Davidson XLH 883 Sportster Motorcycles
...intake ports. If it is wider or narrower at the front than it is at the back, you must "rotate" the heads until the gap is even. Once this is done, you can tighten the head bolts. Tighten them in a ...
Question about Motorcycles
...torque or power but where air consumption is increased, more fuel will be needed though all most kerbside rejetting achieves is usually a heavier consumption for little or no net gain. I suggest you ...
Question about Harley Davidson XLH 883 Sportster Motorcycles
intake the torque is 96-120 in lbs then13-15 ft.lbs.then loosen and repeat the same pattern and the final turque is to turn each bolt a 1/4 turn or 90 deg. mark the shoulder of the bolt and count four
39 questions posted
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions